1. Lai Wenchuan, Qiao Yan, Zhang Jiawei, et.al. Design strategies for markedly enhancing energy efficiency in the electrocatalytic CO2 reduction reaction. Energy & Environmental Science, 2022, 15(9), 3603-3629.
https://doi.org/10.1039/d2ee00472k
2. Sun Xingxia, Zhu Chenguang, Yi Jiali, et al. Reconfigurable logic-in-memory architectures based on a two-dimensional van der Waals heterostructure device. Nature Electronics, 2022, 5 (11), 752.
https://doi.org/10.1038/s41928-022-00858-z
3. Jiang Kang, Liu Zhixiao, Lu Ying-Rui, et. al. Rapid Melt-Quenching Enables General Synthesis of High-Loading Single-Atom Catalysts with Bicontinuous Nanoporous Structure. Advanced Materials, 2022, 35(6).
https://doi.org/10.1002/adma.202207850
4. Peng Jiangbo, Yang Dongcheng, Ren Caixia, et. al. Electronic Properties and Carrier Dynamics at the Alloy Interfaces of WS2xSe2−2x Spiral Nanosheets. Advanced Materials, 2022, 34(11).
https://doi.org/10.1002/adma.202107738
5. Yuan Yuliang, Wang Qiyou, Qiao Yan, et. al. In Situ Structural Reconstruction to Generate the Active Sites for CO2 Electroreduction on Bismuth Ultrathin Nanosheets. Advanced Energy Materials. 2022, 12(29), 2200970.
https://doi.org/10.1002/aenm.202200970
6. Gao Lei, Yang Zhilong, Sun Tulai, et. al. Autocatalytic Surface Reduction-Assisted Synthesis of PtW Ultrathin Alloy Nanowires for Highly Efficient Hydrogen Evolution Reaction. Advanced Energy Materials. 2022, 12(11), 2103943.
https://doi.org/10.1002/aenm.202103943
7. Zhou Wang, He Bingchen, Quan Lijiao, et. al. Binder Chemistry Dependent Electrolyte Reduction in Potassium-Ion Batteries: A Successive, Two-Step Reduction Way. Advanced Energy Materials. 2022, 13(2).
https://doi.org/10.1002/aenm.202202874
8. Chen Yuqing, He Qiu, Mo Ying, et. al. Engineering an Insoluble Cathode Electrolyte Interphase Enabling High Performance NCM811//Graphite Pouch Cell at 60 degrees C. Advanced Energy Materials, 2022, 12(33).
https://doi.org/10.1002/aenm.202201631
9. Yang Chenfan, Zhong Wenda, Shen Ke, et. al. Electrochemically Reconstructed Cu-FeOOH/Fe3O4 Catalyst for Efficient Hydrogen Evolution in Alkaline Media. Advanced Energy Materials, 2022, 12(16), 2200077.
https://doi.org/10.1002/aenm.202200077
10. Gao Lei, Sun Tulai, Tan Xin, et. al. Trace doping of early transition metal enabled efficient and durable oxygen reduction catalysis on Pt-based ultrathin nanowires. Applied Catalysis B: Environmental, 2022, 303, 120918.
https://doi.org/10.1016/j.apcatb.2021.120918
11. Huang Limei, Xiao Guang, Wang Yunjing , et. al. Self-Exfoliation of Flake Graphite for Bioinspired Compositing with Aramid Nanofiber toward Integration of Mechanical and Thermoconductive Properties. Nano-Micro Letters, 2022,14(1),168.
https://doi.org/10.1007/s40820-022-00919-0
12. Yang Hao, Xiong Tuzhi, Zhu, Zhixiao, et. al. Deciphering the lithium storage chemistry in flexible carbon fiber-based self-supportive electrodes. Carbon Energy,2022,4(5),820-832.
https://doi.org/10.1002/cey2.173
13. Zhang Dongdong, Teng Jie, Yang Hongli, et. al. Air-condition process for scalable fabrication of CdS/ZnS 1D/2D heterojunctions toward efficient and stable photocatalytic hydrogen production. Carbon Energy,2022.
https://doi.org/10.1002/cey2.277
14. Gan He, Wu Jing, Zhang Feng, et. al. Uniform Zn2+ Distribution and Deposition Regulated by Ultrathin Hydroxyl-Rich Silica Ion Sieve in Zinc Metal Anodes. Energy Storage Materials, 2023, 55, 264-271.
https://doi.org/10.1016/j.ensm.2022.11.044
15. Gan He, Wu Jing, Li Run, et. al. Ultra-stable and deeply rechargeable zinc metal anode enabled by a multifunctional protective layer. Energy Storage Materials, 2022, 47,602-610.
https://doi.org/10.1016/j.ensm.2022.02.040
16. Xiao Kuikui, Wu Jian-Fang, Yan Hanghang,et. al. Intercalation-deposition mechanism induced by aligned carbon fiber toward dendrite-free metallic potassium batteries.Energy Storage Materials, 2022,51,122-129.
https://doi.org/10.1016/j.ensm.2022.06.033
17. Zhu Chenguang, Liu Huawei, Wang Wenqiang, et. al. Optical synaptic devices with ultra-low power consumption for neuromorphic computing. light: Science & Applications, 2022,11(1),337.
https://doi.org/10.1038/s41377-022-01031-z
18. Huang Cong, Huang Fei, Zhao Xin, et. al. Rational Design of Sulfonamide-Based Additive Enables Stable Solid Electrolyte Interphase for Reversible Zn Metal Anode. Advanced Functional Materials,2022,33(1).
https://doi.org/10.1002/adfm.202210197
19. Huang Cong, Zhao Xin, Hao Yisu, et. al. Self-Healing SeO2 Additives Enable Zinc Metal Reversibility in Aqueous ZnSO4 Electrolytes. Advanced Functional Materials, 2022,32(18), 2112091.
https://doi.org/10.1002/adfm.202112091
20. Lai Wenchuan, Ma, Zesong, Zhang Jiawei, et. al. Dynamic Evolution of Active Sites in Electrocatalytic CO2 Reduction Reaction: Fundamental Understanding and Recent Progress. Advanced Functional Materials, 2022,32(16),2111193.
https://doi.org/10.1002/adfm.202111193
21. Yang Xin, Wu Rong, Zheng Biyuan, et. al. A Waveguide-Integrated Two-Dimensional Light-Emitting Diode Based on p-Type WSe2/n-Type CdS Nanoribbon Heterojunction. ACS Nano,2022,16(3),4371-4378.
https://doi.org/10.1021/acsnano.1c10607
22. Peng Wei, Han Jiuhui, Lu Ying-Rui, et. al. A General Strategy for Engineering Single-Metal Sites on 3D Porous N, P Co-Doped Ti3C2Tx MXene. ACS Nano, 2022,16(3),4116-4125.
https://doi.org/10.1021/acsnano.1c09841
23. Li Hao, Zhao Jingzhe, Huang Limei, et. al. A Constrained Assembly Strategy for High-Strength Natural Nanoclay Film. ACS Nano,2022,16(4),6224-6232.
https://doi.org/10.1021/acsnano.2c00023
24. Ma Zesong, Yang Zhilong, Lai wenchuan, et. al. CO2 electroreduction to multicarbon products in strongly acidic electrolyte via synergistically modulating the local microenvironment. Nature Communications, 2022, 13, 7596.
https://doi.org/10.1038/s41467-022-35415-x
25. Zhang Jun, Wang Wenxiang, Zhang Yan, et. al. Small-molecule ionic liquid-based adhesive with strong room-temperature adhesion promoted by electrostatic interaction. Nature Communications, 2022, 13(1), 5214.
https://doi.org/10.1038/s41467-022-32997-4
26. Liu Heng, Jiang Luozhen, Khan Javid, et. al. Decorating Single-Atomic Mn Sites with FeMn Clusters to Boost Oxygen Reduction Reaction. Angewandte Chemie International Edition.2022.
https://doi.org/10.1002/anie.202214988
27. Tan Qirong, Xiao Ran, Yao Xincheng, et. al. Non-oxygen anion-regulated in situ cobalt based heterojunctions for active alkaline hydrogen evolution catalysis. Chemical Engineering Journal. 2022,433(2),133514.
https://doi.org/10.1016/j.cej.2021.133514
28. Huang Jing, Zhang Jizheng, Han Fangchao, et. al. An in situ solid-electrolyte interphase strategy to inhibit polysulfide shuttles of FeS2-based cathode material. Chemical Engineering Journal. 2022,427,131765.
https://doi.org/10.1016/j.cej.2021.131765
29. Li Shengyang, Cao Jinhui, Wang Tao, et. al. Intercalation and covalent bonding strategies for constructing a stable cathode for high-energy density and long-cycling potassium-organic batteries. Chemical Engineering Journal,2022,431(3),133215.
https://doi.org/10.1016/j.cej.2021.133215
30. Zhao Yanhong, Hu Zhuang, Fan Changling, et. al. Constructing high-performance N-doped carbon nanotubes anode by tuning interlayer spacing and the compatibility mechanism with ether electrolyte for sodium-ion batteries. Chemical Engineering Journal,2022,446(4),137427.
https://doi.org/10.1016/j.cej.2022.137427
31. Liu Heng, Jiang Luozhen, Wang Yamin, et. al. Boosting Oxygen Reduction with Coexistence of Single-atomic Fe and Cu Sites Decorated Nitrogen-doped Porous Carbon. Chemical Engineering Journal,2022,452(1),138938.
https://doi.org/10.1016/j.cej.2022.138938
32. Zhu, Yanlin, Sun, Yanyan, Khan, Javid, et. al. NaClO-induced sodium-doped cyano-rich graphitic carbon nitride nanosheets with nitrogen vacancies to boost photocatalytic hydrogen peroxide production.Chemical Engineering Journal,2022,443,136501.
https://doi.org/10.1016/j.cej.2022.136501
33. Jiang Zhao, Ouyang Ting, Ding Le,et. al. 3D self-bonded porous graphite fiber monolith for phase change material composite with high thermal conductivity.Chemical Engineering Journal, 2022,448,135496.
https://doi.org/10.1016/j.cej.2022.135496
34. Zhong Wenda, Yang Chenfan, Wu Jing, et. al. Oxygen vacancies induced by charge compensation tailoring Ni-doped Co3O4 nanoflakes for efficient hydrogen evolution. Chemical Engineering Journal,2022,436,134813.
https://doi.org/10.1016/j.cej.2022.134813
35. Lu Xianlu, Zhang Dongdong, Zhong Jiang, et. al. MOF-5 as anodes for high-temperature potassium-ion batteries with ultrahigh stability. Chemical Engineering Journal,2022,432,134416.
https://doi.org/10.1016/j.cej.2021.134416
36. Zhang Ying, Peng Chi, Zhang Yaxin, et. al. In-situ crosslinked Zn2+-conducting polymer complex interphase with synergistic anion shielding and cation regulation for high-rate and dendrite-free zinc metal anodes.Chemical Engineering Journal,2022,448,137653.
https://doi.org/10.1016/j.cej.2022.137653
37. Tang Shunhe,Yu Chuying, Liu Xinxin, et. al. 2-Methylimidazole assisted synthesis of nanocrystalline shell reinforced PPy hydrogel with high mechanical and electrochemical performance.Chemical Engineering Journal,2022,430,133033.
https://doi.org/10.1016/j.cej.2021.133033
38. Guo Xu, Lu Yanfen, Fu Danchen,et. al. Ultrahigh ionic conductivity and alkaline tolerance of poly (amidoxime)-based hydrogel for high performance piezoresistive sensor. Chemical Engineering Journal, 2022,452,139208.
https://doi.org/10.1016/j.cej.2022.139208
39. Khan Javid, Sun Yanyan, Han Lei,et. al. A Comprehensive Review on Graphitic Carbon Nitride for Carbon Dioxide Photoreduction.Small Methods, 2022,6(12),2201013.
https://doi.org/10.1002/smtd.202201013
40. Yao Xincheng, Li Chenglin, Xiao Ran, et. al. Heterostructures Stimulate Electric-Field to Facilitate Optimal Zn2+ Intercalation in MoS2 Cathode. Small,18(47),2204534.
https://doi.org/10.1002/smll.202204534
41. Xiong Tuzhi, Yao Xincheng, Zhu, Zhixiao, et. al. In Situ Grown Co-Based Interstitial Compounds: Non-3d Metal and Non-Metal Dual Modulation Boosts Alkaline and Acidic Hydrogen Electrocatalysis. Small,18(9),2105331.
https://doi.org/10.1002/smll.202105331
42. Zhang Zuocai, Lu Tianyun, Yang Dan, et. al. A Dual-Function Sensor for Highly Sensitive Detection of Flame and Humidity. Small,18(38),2203334.
https://doi.org/10.1002/smll.202203334
43. Huang Cong, Zhao Xin, Hao Yisu, et. al. Long Shelf-Life Efficient Electrolytes Based on Trace l-Cysteine Additives toward Stable Zinc Metal Anodes. Small,18(37),2203674.
https://doi.org/10.1002/smll.202203674
44. Hu Zhuang, Zhang Ruijie, Fan Changling, et. al. Synergistic Effect, Structural and Morphology Evolution, and Doping Mechanism of Spherical Br-Doped Na3V2(PO4)(2)F-3/C toward Enhanced Sodium Storage.Small,18(22),2201719.
https://doi.org/10.1002/smll.202201719
45. Huang Jianhua, Yao Yongsheng, Huang Ming, et. al. Creating Unidirectional Fast Ion Diffusion Channels in G/NiS2-MoS2 Heterostructures for High-Performance Sodium-Ion Batteries. Small,18(18),2200782.
https://doi.org/10.1002/smll.202200782
46. Tian Jiaxin, Peng Ming, Luo Min, et. al. Atomic Engineering Catalyzed Redox Kinetics of NixCo1-x(OH)(2) on Nanoporous Phosphide Electrode for Efficient Ni-Zn Batteries. Small,18(19),2200452.
https://doi.org/10.1002/smll.202200452
47. Yang Qingcheng, Zhao Yang, Meng Linghu, et. al. Nanoporous Intermetallic SnTe Enables Efficient Electrochemical CO2 Reduction into Formate via Promoting the Fracture of Metal-Oxygen Bonding. Small,18(17),2107968.
https://doi.org/10.1002/smll.202107968
48. Liu Zhaoen, Hu Zewei,Jiang Xueao, et. al. Metal-Organic Framework Confined Solvent Ionic Liquid Enables Long Cycling Life Quasi-Solid-State Lithium Battery in Wide Temperature Range. Small,18(37),2203011.
https://doi.org/10.1002/smll.202203011
49. Wei Qinqin, Xu Xiandong, Shen Qiang, et. al. Metal-carbide eutectics with multiprincipal elements make superrefractory alloys. Science Advances,2022,8(27),eabo2068.
https://doi.org/10.1126/sciadv.abo2068
50. Huang Cong, Zhao Xin, Hao, Yisu, et. al. Highly reversible zinc metal anodes enabled by protonated melamine. Journal of Materials Chemistry A,2022,10(12),6636-6640.
https://doi.org/10.1039/d1ta10517e
51. Zeng Ying, Hu Jian,Yang Jiaofeng, et. al. Mechanistic insights into the pseudocapacitive performance of bronze-type vanadium dioxide with mono/multi-valent cations intercalation. Journal of Materials Chemistry A, 2022,10(19),10439-10451.
https://doi.org/10.1039/d2ta00760f
52. Hu Jian, Yang Chao, Guo, Kunkun. Understanding the electrochemical reaction mechanisms of precious metals Au and Ru as cathode catalysts in Li-CO2 batteries. Journal of Materials Chemistry A, 2022,10(26),14028-14040.
https://doi.org/10.1039/d2ta02495k
53. Lai Wenchuan, Yu Penglin, Gao Lei, et. al. Boosting the interfacial hydrogen migration for efficient alkaline hydrogen evolution on Pt-based nanowires. Journal of Materials Chemistry A, 2022,10(32),16834-16841.
https://doi.org/10.1039/d2ta05156g
54. Zeng Fan, Song Xianyin, Liang Jing, et. al. Multi-electron/ion conduction channels enabling high-performance flexible supercapacitors. Journal of Materials Chemistry A, 2022, 10(347), 25148-25158.
https://doi.org/10.1039/d2ta06580k
55. Lin Wujun, Lu Ying-Rui, Peng Wei, et. al. Atomic bridging modulation of Ir-N, S co-doped MXene for accelerating hydrogen evolution. Journal of Materials Chemistry A, 2022, 10(18), 9878-9885.
https://doi.org/10.1039/d2ta00550f
56. Qiao Yijin, Peng Ming, Lan Jiao, et. al. Active-sites engineering in dealloyed nanoporous catalysts for electrocatalytic water splitting. Journal of Materials Chemistry A, 2022, 11(2), 495-511.
https://doi.org/10.1039/d2ta07677b
57. Hu Zewei, Liu Zhixiao, Huang Bin, et. al. MXene supported transition metal nanoparticles accelerate sulfur reduction reaction kinetics. Journal of Materials Chemistry A, 2022, 10(26), 13758-13768.
https://doi.org/10.1039/d2ta01961b
58. Xiang Shuo, Khan Arshad, Zhou, Zeyan, et. al. Photocatalytic hydrogen evolution from water based on Zn-terpyridine 2D coordination nanosheets. Journal of Materials Chemistry A, 2022, 10(45), 24345-24352.
https://doi.org/10.1039/d2ta05114a
59. Qiao Yan, Lai Wenchuan, Huang Kai, et. al. Engineering the Local Microenvironment over Bi Nanosheets for Highly Selective Electrocatalytic Conversion of CO2 to HCOOH in Strong Acid. ACS Catalysis, 2022, 12(4),2357-2364.
https://doi.org/10.1021/acscatal.1c05135
60. Zhang Feng, Ma Jun, Tan Ya, et. al. Construction of Porphyrin Porous Organic Cage as a Support for Single Cobalt Atoms for Photocatalytic Oxidation in Visible Light. ACS Catalysis, 2022, 12(10), 5827-5833.
https://doi.org/10.1021/acscatal.2c00625
61. Xiong Tuzhi, Huang Bowen, Wei Jingjing, et. al. Unveiling the promotion of accelerated water dissociation kinetics on the hydrogen evolution catalysis of NiMoO4 nanorods. Journal of Energy Chemistry, 2022,67,805-813.
https://doi.org/10.1016/j.jechem.2021.11.025
62. Zhang Jiesong, Wu Jian-Fang, Wang Zixing, et. al. Stabilizing SEI by cyclic ethers toward enhanced K+ storage in graphite.Journal of Energy Chemistry, 2022,71,344-350.
https://doi.org/10.1016/j.jechem.2022.03.021
63. Zhang Rui, Fu Qingfeng, Gao Peng, et. al. Transition metal carbonate anodes for Li-ion battery: fundamentals, synthesis and modification.Journal of Energy Chemistry, 2022,70,95-120.
https://doi.org/10.1016/j.jechem.2022.01.048
64. Lin Xin, Liu Xunlin, Zhao Yang, et. al.Dynamic surface restructuring of nanoporous Cu2−xSe for efficient CO2 electroreduction into methanol. Journal of Energy Chemistry, 2022,71,514-520.
https://doi.org/10.1016/j.jechem.2022.03.032
65. Zhang Ying, Zhao Tianyu, Yang Shanchen, et. al. Flexible PEDOT: PSS nanopapers as “anion-cation regulation” synergistic interlayers enabling ultra-stable aqueous zinc-iodine batteries. Journal of Energy Chemistry, 2022,75,310-320.
https://doi.org/10.1016/j.jechem.2022.08.026
66. Gao Peng, Tang Pei, Mo Ying, et. al. Covalency competition induced selective bond breakage and surface reconstruction in manganese cobaltite towards enhanced electrochemical charge storage. Green Energy & Environment, 2022.
https://doi.org/10.1016/j.gee.2022.10.003
67. Ran Jiamiao, Liu Hui, Dong Hongliang, et. al.Accurate quantification of TiO2(B)'s phase purity via Raman spectroscopy. Green Energy & Environment,2022.
https://doi.org/10.1016/j.gee.2022.02.008
68. Luo Ziyu, Zheng Weihao, Luo, Nannan, et. al.Photoluminescence Lightening: Extraordinary Oxygen Modulated Dynamics in WS2 Monolayers. Nano Letters,22(5),2112-2119.
https://doi.org/10.1021/acs.nanolett.2c00462
69. Li Kaihui, Xiao Feiping, Guan Wen, et. al.Morphology Deformation and Giant Electronic Band Modulation in Long-Wavelength WS2 Moiré Superlattices.Nano Letters,22.
https://doi.org/10.1021/acs.nanolett.2c02418
70. Chen Dechao, Wei Zengxi, Wang Mengjia, et. al. Scalable-doped Nanoporous 1T″ReSe2via a General Surface Co-Alloy Strategy. Nano Letters,2022,22(17),7020-7027.
https://doi.org/10.1021/acs.nanolett.2c01837
71. Xiong Tuzhi, Gao Yingxia, Huang Peng, et. al. Actual pseudocapacity for Li ion storage in tunable core-shell electrode architectures. Ecomat,2022,4(5),e12217.
https://doi.org/10.1002/eom2.12217
72. Zhang Dongdong, Fang Zhi, Wang Lin,et. al. Controllable growth of single-crystalline zinc oxide nanosheets under ambient condition toward ammonia sensing with ultrahigh selectivity and sensitivity.Journal of Advanced Ceramics,2022,11(8),1187-1195.
https://doi.org/10.1007/s40145-022-0592-4
73. Shen Ke, Zhang Xue, Yu Suyuan, et. al. Characterization of heterogeneity in NBG-18 nuclear graphite microstructure by correlative analysis of optical texture and focused ion beam transmission electron microscopy observations.Carbon,2022,189,604-616.
https://doi.org/10.1016/j.carbon.2021.12.035
74. Xu Shang, Jiang Fulin, Lu Xianlu, et. al. Carbon-based hole storage engineering toward ultralow onset potential and high photocurrent density of integrated SiC photoanodes. Carbon, 2023, 202, 41-50.
https://doi.org/10.1016/j.carbon.2022.10.046
75. He Yutao, Ming Wenquan, Shen Ruohan, et. al. IDART: An Improved Discrete Tomography Algorithm for Reconstructing Images With Multiple Gray Levels. Ieee Transactions On Image Processing,2022,31,2608-2619.
https://doi.org/10.1109/TIP.2022.3152632
76. Zhu Yanlin, Liu Xuetao, Liu Heng, et. al. Regulating nitrogen vacancies within graphitic carbon nitride to boost photocatalytic hydrogen peroxide production.Sustainable Materials and Technologies,2022,2(5),617-629.
https://doi.org/10.1002/sus2.83
77. Jiang Kang, Wen Xi, Deng Yuxian, et. al. Integration of all-printed zinc ion microbattery and glucose sensor toward onsite quick detections. Sustainable Materials and Technologies, 2022, 2(3), 368-378.
https://doi.org/10.1002/sus2.59
78. Chen Peng, Yang Chao, Gao Peng, et. al.Distinctive Formation of Bifunctional ZnCoS-rGO 3D Hollow Microsphere Flowers with Excellent Energy Storage Performances. Chemistry of Materials,2022.
https://doi.org/10.1021/acs.chemmater.2c00794
79. Wang Jie, Xie Guanshun, Yu Changqiang,et. al. Stabilizing Ti3C2Tx in a Water Medium under Multiple Environmental Conditions by Scavenging Oxidative Free Radicals.Chemistry of Materials, 2022,34(21),9517-9526.
https://doi.org/10.1021/acs.chemmater.2c02013
80. Li Jingxian,Yang Hongfen,Cai Ren, et. al. Ultrahighly Sensitive Sandwich-Type Electrochemical Immunosensor for Selective Detection of Tumor Biomarkers. ACS Applied Materials & Interfaces, 2022,14(39),44222-44227.
https://doi.org/10.1021/acsami.2c13891
81. Li Jingxian,Luo Mengyu, Jin Can, et. al.Plasmon-Enhanced Electrochemiluminescence of PTP Decorated Eu-MOF-Based Pt-Tipped Au Bimetallic Nanorods for Lincomycin Assay. ACS Applied Materials & Interfaces, 2022,14(1),383-389.
https://doi.org/10.1021/acsami.1c21528
82. Yang Min, Fu Licai, Zhu Jiajun,et. al. Lower Interfacial Resistance between a Ta-Doped Li7La3Zr2O12 (LLZTO) Solid Electrolyte and NiCl2 Cathode by a Simple Heat Treatment for a High-Specific Energy Thermal Batter.ACS Applied Materials & Interfaces,2022.
https://doi.org/10.1021/acsami.2c14067
83. Zheng Hang-bo, Wang Yuan-li, Xie Jia-wei, et. al. Enhanced Alkaline Oxygen Evolution Using Spin Polarization and Magnetic Heating Effects under an AC Magnetic Field. ACS Applied Materials & Interfaces,2022.
https://doi.org/10.1021/acsami.2c05977
84. Wang Bin,Zeng Ying, Chen Peng, et. al.Mechanical Insights into the Electrochemical Properties of Thornlike Micro-/Nanostructures of PDA@MnO2@NMC Composites in Aqueous Zn Ion Batteries. ACS Applied Materials & Interfaces,2022,14(31),36079-36091.
https://doi.org/10.1021/acsami.2c06368
85. Wu Xiewen, Wang Song , Fang Jing, et. al. Enhanced Photocatalytic Efciency in Visible-Light-Induced NADH Regeneration by Intramolecular Electron Transfer. ACS Appl. Mater. Interfaces,2022, 14 (34),38895-38904
https://doi.org/10.1021/acsami.2c11174
86. Ma Jun, Zhang Feng, Tan Ya, et. al. Promoted Electron Transfer and Surface Absorption by Single Nickel Atoms for Photocatalytic Cross-Coupling of Aromatic Alcohols and Aliphatic Amines under Visible Light.ACS Appl. Mater. Interfaces,2022, 14 (16),18383-18392.
https://doi.org/10.1021/acsami.2c00311
87. Liu Qi,Tan Jin, Liu Zhenfang, et. al. Transference Number Reinforced-Based Gel Copolymer Electrolyte for Dendrite-Free Lithium Metal Batteries.ACS Appl. Mater. Interfaces,2022, 14 (23),26612-26621.
https://doi.org/10.1021/acsami.2c01513
88. Zhang Yanlong, Lan Jiao, Xie Feng, et. al. Aligned InS Nanorods for Efficient Electrocatalytic Carbon Dioxide Reduction.ACS Appl. Mater. Interfaces,2022, 14(22),25257-25266.
https://doi.org/10.1021/acsami.2c01152
89. Zhang Ying, Peng Chi, Zeng Zhi, et. al. Sustainable Phytic Acid–Zinc Anticorrosion Interface for Highly Reversible Zinc Metal Anodes. ACS Appl. Mater. Interfaces,2022, 14(8),10419-10427.
https://doi.org/10.1021/acsami.1c24288
90. Zhou Minghan,Fan Yuqin, Gao Yang, et. al. Less is More: Trace Amount of a Cyclic Sulfate Electrolyte Additive Enable Ultra-Stable Graphite Anode for High-Performance Potassium-Ion Batteries.ACS Appl. Mater. Interfaces,2022, 14(39),44429-44438.
https://doi.org/10.1021/acsami.2c12704
91. Wang Xiaozheng,Li Jia,Chen Yifu, et. al. Spray-Coating Thick Films of All-Inorganic Halide Perovskites for Filterless Narrowband Photodetectors. ACS Appl. Mater. Interfaces,2022, 14(21),24583-24591.
https://doi.org/10.1021/acsami.2c03585
92. Zou Yubo, Chen Zeyu, Guo Xu, et. al. Mechanically Robust and Elastic Graphene/Aramid Nanofiber/ Polyaniline Nanotube Aerogels for Pressure Sensors. ACS Appl. Mater. Interfaces,2022, 14(15),17858-17868.
https://doi.org/10.1021/acsami.2c02538
93. Peng Zhiyuan, Yu Chuying, Zhong Wenbin, et. al.Facile Preparation of a 3D Porous Aligned Graphene-Based Wall Network Architecture by Confined Self-Assembly with Shape Memory for Artificial Muscle, Pressure Sensor, and Flexible Supercapacitor. ACS Appl. Mater. Interfaces,2022, 14(15),17739-17753.
https://doi.org/10.1021/acsami.2c00987
94. Huang Wensen,Chen Jihua, Yan Hongge, et. al. High plasticity mechanism of high strain rate rolled Mg-Ga alloy sheets.Journal of Materials Science and Technology,2022,101,187-198.
https://doi.org/10.1016/j.jmst.2021.05.064
95. Shen, R. H.,He, Y. T., Ming, W. Q.,et. al. Electron tomography for sintered ceramic materials by a neural network algebraic reconstruction technique.Journal of Materials Science and Technology, 2022,100,75-81.
https://doi.org/10.1016/j.jmst.2021.05.051
96. Xu Kaiqiang, Shen Jie,Zhang Shiying, et. al. Efficient interfacial charge transfer of BiOCl-In2O3 step-scheme heterojunction for boosted photocatalytic degradation of ciprofloxacin. Journal of Materials Science and Technology, 2022,121,236-244.
https://doi.org/10.1016/j.jmst.2021.12.070
97. Zhu Wenxiang, Zhou Zheng,Huang Yuting, et. al. A versatile 3D-Printable hydrogel for antichondrosarcoma, antibacterial, and tissue repair. Journal of Materials Science and Technology, 2022,136,200-211.
https://doi.org/10.1016/j.jmst.2022.07.010
98. Tang Jie, Liu Mingcai,Bo Guowei, et. al. Unraveling precipitation evolution and strengthening function of the Al-Zn-Mg-Cu alloys with various Zn contents: Multiple experiments and integrated internal-state-variable modeling. Journal of Materials Science and Technology, 2022,116,130-150.
https://doi.org/10.1016/j.jmst.2021.12.008
99. Liu Jin, Du Zhiyong, Su Jinlong, et. al. Effect of quenching residual stress on precipitation behaviour of 7085 aluminium alloy. Journal of Materials Science and Technology, 2022, 132, 154-165.
https://doi.org/10.1016/j.jmst.2022.06.010
100. Zhang Jiawei, Zeng Gangming, Chen Lanlan, et. al. Tuning the reaction path of CO2 electroreduction reaction on indium single-atom catalyst: Insights into the active sites. Nano Research,2022,15(5),4014-4022.
https://doi.org/10.1007/s12274-022-4177-x
101. Liu Huawei, Fang Lizhen, Zhu Xiaoli, et. al. Epitaxial van der Waals contacts for low schottky barrier MoS2 field effect transistors. Nano Research,2022.
https://doi.org/10.1007/s12274-022-5229-y
102. Liu Ying, Jiang Ying, Xu Zheyuan,et. al. Magnetic Doping Induced Strong Circularly Polarized Light Emission and Detection in 2D Layered Halide Perovskite. Advanced Optical Materials, 2022,10(13),2200183.
https://doi.org/10.1002/adom.202200183
103. Li Ziwei, Wang Yajuan,Li Lihui, et. al. Low Threshold and Tunable Modes in Plasmon-Assisted Perovskite Microlasers. Advanced Optical Materials,2022,10(12),2102777.
https://doi.org/10.1002/adom.202102777
104. Li Junchi,Chen Yifu, Zhang Bin, et. al. Non-Traditional Positively-Biased Narrow-Band Perovskite Single-Crystal Photodetectors Enabled by Interfacial Engineering. Advanced Optical Materials,2022,10(5),2102225.
https://doi.org/10.1002/adom.202102225
105. Yang Lide, Wei Tao, Huang Rutao, et. al. A strengthened nano-carbon network endowing the uniaxially oriented polyamide composite with super-high strength. Composites Science and Technology,2022,229.
https://doi.org/10.1016/j.compscitech.2022.109708
106. Li Chuanyi, Wang Xianpeng, Li Yanhua, et. al. 3D modified graphene-carbon fiber hybridized skeleton/PDMS composites with high thermal conductivity. Composites Science and Technology, 2022,225,109499.
https://doi.org/10.1016/j.compscitech.2022.109499
107. Du Xinxin,Yang Wulin, Zhu Jiajun,et. al. Aligning diamond particles inside BN honeycomb for significantly improving thermal conductivity of epoxy composite.Composites Science and Technology, 2022,109370.
https://doi.org/10.1016/j.compscitech.2022.109370
108. Xu Yang, Jiang Xueao, Liu, Zhaoen,et. al. Solvate ionic liquid-based ionogels for lithium metal batteries over a wide temperature range.Journal of Power Sources,2022,546,231952.
https://doi.org/10.1016/j.jpowsour.2022.231952
109. Zhang Weihua, Gao Peng, Hu Zhuang,et. al. Construction of superior performance LiVPO4F/C cathode assisting by a regulating additive NH4F and the "Combination-Protection-Release" mechanism for lithium ion batteries. Journal of Power Sources,2022,523,231024.
https://doi.org/10.1016/j.jpowsour.2022.231024
110. Su Jinlong, Jiang Fulin, Li Junjie, et. al. Phase transformation mechanisms, microstructural characteristics and mechanical performances of an additively manufactured Ti-6Al-4V alloy under dual-stage heat treatment.Materials and Design,2022,223,111240.
https://doi.org/10.1016/j.matdes.2022.111240
111. Bo Guowei,Wang Yinlu, Liu Mingcai, et. al. Experimental and modeling investigations of the non-isothermal and isothermal precipitations in an Al-Cu-Mg-Zr alloy with various pre-precipitation microstructures.Materials and Design,2022,217,110640.
https://doi.org/10.1016/j.matdes.2022.110640
112. Guo Ting, Zhong Fang,Wen, Feng, et. al. Engineering of tenogenic patch scaffold with fibrous microtopography and reinforcement via uniaxial cold-drawing. Materials and Design, 2022, 217, 110609.
https://doi.org/10.1016/j.matdes.2022.110609
113. Li Jieqiong, Zhu Zhixiao, Huang Yongchao, et. al. Ni3N: A multifunctional material for energy storage and electrocatalysis. Materials Today Energy,2022,26,101001.
https://doi.org/10.1016/j.mtener.2022.101001
114. Tan Ya, Ma Jun, Zhang Feng, et. al. Polymer Photocatalyst−Enzyme Coupled Artifcial Photosynthesis System for CO2 Reduction into Formate Using Water as the Electron Donor. ACS Sustainable Chemistry & Engineering,2022,10(37),12065–12071.
https://doi.org/10.1021/acssuschemeng.2c02199
115. Li, S. Y., Duan, S. Y., Ming, W. Q., et. al. Genetic structural phase evolution from Li-containing S-like phase precipitates towards S-phase in AlCuLiMg alloys. Acta Materialia,2022,233,117997.
https://doi.org/10.1016/j.actamat.2022.117997
116. Ran Junhui, Wang Hao, Deng Wen, et. al. Ionic Liquid-Tuned Crystallization for Stable and Efficient Perovskite Solar Cells.Solar RRL,2022,6(7),2200176.
https://doi.org/10.1002/solr.202200176
117. Zhong Fang, Hu Wei, Zhu Peining, et. al. Piezoresistive design for electronic skin: from fundamental to emerging applications.Opto-Electronic Advances,2022,5(8),210029.
https://doi.org/10.29026/oea.2022.210029
118. Wang Lin, Chen, Xuli.Three-dimensional activated graphite paper for high-performance supercapacitors.Journal of Energy Storage,2022,52,104939.
https://doi.org/10.1016/j.est.2022.104939
119. Zhao Xin, Zhou You, Xu Yali, et. al. Customizing oxygen-containing functional groups for reduced graphene oxide film supercapacitor with high volumetric performance.Journal of Energy Storage,2022,52,104642.
https://doi.org/10.1016/j.est.2022.104642
120. Fang Lizhen, Liu Huawei, Guan Wen, et. al. Controlled synthesis of ultrathin metallic MoO2 nanosheets for van der Waals contact.Science China-Materials,2022.
https://doi.org/10.1007/s40843-022-2260-6
121. Wu Qiuli, Jiang Kang, Han Jiuhui, et. al.Dynamic shrinkage of metal-oxygen bonds in atomic Co-doped nanoporous RuO2 for acidic oxygen evolution.Science China-Materials, 2022, 65(5), 1262-1268.
https://doi.org/10.1007/s40843-021-1912-8
122. Huang Limei, Li Hao, Wang Xinxin, et. al. High-efficiency, self-grinding exfoliation of small graphene nanosheets from microcrystalline graphite driven by microbead milling as conductive additives.Science China-Materials, 2022, 65(9), 2463-2471.
https://doi.org/10.1007/s40843-021-2015-8
123. Zhang Yi, Wei Qinqin, Xie Pan,et. al. An ultrastrong niobium alloy enabled by refractory carbide and eutectic structure.Materials Research Letters,2022,11(3),169-178.
https://doi.org/10.1080/21663831.2022.2133977
124. Wang Kun, Xiao Shifang, Chen, Jun, et. al. Exploring atomic mechanisms of microstructure evolutions in crystals under vacancy super- or undersaturation states by a kinetic amplitude-expanded phase-field-crystal approach.International Journal of Plasticity, 2022, 157, 103386.
https://doi.org/10.1016/j.ijplas.2022.103386
125. Li Pan, Huang Yongfeng,Wang Kun, et. al. Crystallographic-orientation-dependence plasticity of niobium under shock compressions. International Journal of Plasticity, 2022,150,103195.
https://doi.org/10.1016/j.ijplas.2021.103195
126. Xie Guanshun,Han, Chuang, Song, Fei, et. al. A study on the role of plasmonic Ti3C2Tx MXene in enhancing photoredox catalysis. Nanoscale,2022,14(48),18010-18021.
https://doi.org/10.1039/d2nr05983e
127. Pang Simeng, Hu Zhuang, Fan Changling , et. al. Insights into the sodium storage mechanism of Bi2Te3 nanosheets as superior anodes for sodium-ion batteries. Nanoscale, 2022, 14(5), 1755-1766.
https://doi.org/10.1039/d1nr07960c
128. Li Jingxian, Cai Ren, Tan Weihong. A Novel ECL Sensing System for Ultrahigh Sensitivity miRNA-21 Detection Based on Catalytic Hairpin Assembly Cascade Nonmetallic SPR Effect. Analytical Chemistry,2022,94(36),12280-12285.
https://doi.org/10.1021/acs.analchem.2c03238
129. Li Jingxian, Luo Mengyu,Yang Hongfen, et. al.Novel Dual-Signal Electrochemiluminescence Aptasensor Involving the Resonance Energy Transform System for Kanamycin Detection.Analytical Chemistry,2022,94(16),6410-6416.
https://doi.org/10.1021/acs.analchem.2c01163
130. Liu Zhichao, Zhao Shuoqing, Li Guohao, et. al. Stabilizing BiOCl/Ti3C2Tx hybrids for potassium-ion batteries via solid electrolyte interphase reconstruction.Inorganic Chemistry Frontiers,2022,9(13),3165-3175.
https://doi.org/10.1039/d2qi00640e
131. Peng Linfen, Yu Changqiang, Ma Yuheng, et. al. Self-assembled transition metal chalcogenides@CoAl-LDH 2D/2D heterostructures with enhanced photoactivity for hydrogen evolution.Inorganic Chemistry Frontiers,2022,9(5),994-1005.
https://doi.org/10.1039/d1qi01603b
132. Li, A. Q., Lin, N., Xu, L. W., et. al. Improvement mechanism of the oxidation resistance of Al-doped Ti(C, N)-based cermets: Influence of enriched Al in the subsurface oxide layer.Corrosion Science,2022,209,110722.
https://doi.org/10.1016/j.corsci.2022.110722
133. Huang, Yuting, Meng Xiaolin,Zhou Zheng, et. al. A naringin-derived bioink enhances the shape fidelity of 3D bioprinting and efficiency of cartilage defect repair. Journal of Materials Chemistry B,2022,10(36),7030-7044.
https://doi.org/10.1039/d2tb01247b
134. He Yahui, Zhou Zheng, Huang Yuting, et. al. An antibacterial ε-poly-L-lysine-derived bioink for 3D bioprinting applications. Journal of Materials Chemistry B,2022,10(40),8274-8281.
https://doi.org/10.1039/d1tb02800f
135. Cai Li,Zhou Jing, Chen Xiayong, et. al. Pt-based intermetallic compounds with tunable activity and selectivity toward hydrogen production from formic acid. Applied Surface Science, 2022, 597,153530.
https://doi.org/10.1016/j.apsusc.2022.153530
136. Qiu Zhaolin, Zhang Zhibo,Xiong Yongnan, et. al. Size effects of graphene sheets on the strengthening mechanism of Al-graphene composites: A molecular dynamics study.Applied Surface Science,2022,596,153546.
https://doi.org/10.1016/j.apsusc.2022.153546
137. Xu Kaiqiang, Xu Difa, Li Zhongfu,et. al. Enhanced visible-light photocatalytic degradation of ciprofloxacin hydrochloride by bulk iodine doped BiOCl with rich oxygen vacancy.Applied Surface Science,2022,578,152083.
https://doi.org/10.1016/j.apsusc.2021.152083
138. Xing Guoqiang, Wu Lei,Kuang, Guoqiang,et. al. Integration of high surface-energy electrochromic polymer with in-situ polymerized quasi-solid electrolyte for efcient electrochromism. Electrochimica Acta,2022,432,141216.
https://doi.org/10.1016/j.electacta.2022.141216
139. Zhang Xiangni, Yang Shanchen, Huang Zien, et. al.Recyclable nanopaper separators with uniform sub-20 nm nanopores for high-power and high-capacity zinc metal anodes. Electrochimica Acta,2022,430,141081.
https://doi.org/10.1016/j.electacta.2022.141081
140. Liu Zhaoen, Hu Zewei, Jiang Xueao,et. al. Multi-functional ZnS quantum Dots/Graphene aerogel modified separator for high performance lithium-sulfur batteries.Electrochimica Acta,2022,422,140496.
https://doi.org/10.1016/j.electacta.2022.140496
141. Wang Deping, He Yongqiang, Liu Hongbo,et. al. Engineering shell thickness of pyridinic-N rich hollow carbon nanospheres for stable and high energy density potassium ion hybrid capacitors. Electrochimica Acta,2022,428,140931.
https://doi.org/10.1016/j.electacta.2022.140931
142. Yuan Zhipeng,Hu Zhuang, Gao Peng,et. al. Graphitic carbon nitride-derived high lithium storage capacity graphite material with regular layer structure and the structural evolution mechanism.Electrochimica Acta,2022,409,139985.
https://doi.org/10.1016/j.electacta.2022.139985
143. Xu Yali, Wu Yuxuan, Tang Qunli,et. al. Water intercalation strategy to fabricate low-potential and dense grapheme film anode for high energy density K-ion batteries.Electrochimica Acta,2022,403,139626.
https://doi.org/10.1016/j.electacta.2021.139626
144. Xing Guoqiang, Kuang Guoqiang, Tao Yijie,et. al.Ultra-strong ionic liquid-based polymer composite electrolyte for high performance electrochromic devices.Solar Energy Materials & Solar Cells,2022,248,111968.
https://doi.org/10.1016/j.solmat.2022.111968
145. Liao Moyu, Qin Hang, Guo Wenming,et. al.Hydrogen production employing Cu/Zn-BTC metal- organic framework on cordierite honeycomb ceramic support in methanol steam reforming process within a microreactor.International Journal of Hydrogen Energy, 2022, 47(83), 35136-35148.
https://doi.org/10.1016/j.ijhydene.2022.08.125
146. Tan Li, Jiang Zhiqiang, Gao Yang,et. al.Synergistic interaction between in situ exsolved and phosphorized nanoparticles and perovskite oxides for enhanced electrochemical water splitting. International Journal of Hydrogen Energy,2022,47(46),20016-20026.
https://doi.org/10.1016/j.ijhydene.2022.04.086
147. Chen Hui-hui,Zheng Hang-bo, Yang Tong-hui,et. al. AC magnetic field enhancement oxygen evolution reaction of bimetallic metal-organic framework. International Journal of Hydrogen Energy,2022,47(43),18675-18687.
https://doi.org/10.1016/j.ijhydene.2022.04.014
148. An Xudong, Zhang Hongqiang, Zhu Te,et. al. Exploration of vacancy defect formation and evolution in low-energy ion implanted pure titanium.International Journal of Hydrogen Energy,2022,47(13),8467-8479.
https://doi.org/10.1016/j.ijhydene.2021.12.192
149. Wang Feng, Liu Jiageng, Liang Lina,et. al.Synergetic catalyst effect of Ni/Pd dual metal coating accelerating hydrogen storage properties of ZrCo alloy.International Journal of Hydrogen Energy, 2022,47(17),9946-9957.
https://doi.org/10.1016/j.ijhydene.2022.01.09
150. Ling Liming, Wang Xiwen, Zhou Minghan,et. al.Carbon-Coated Flower-Like TiO2 Nanosphere as an Ultrastable Anode Material for Potassium-Ion Batteries: Structure Design and Mechanism Study. ACS Applied Energy Materials,2022.
https://doi.org/10.1021/acsaem.2c03171
151. Feng Bin, Long Tao, Yang Caili, et. al.Porous Sb Nanocubes Embedded in Three-Dimensional Interconnected Nitrogen-Doped Carbon Frameworks for Enhanced Sodium Storage. ACS Applied Energy Materials,2022,5(11),14107-14118.
https://doi.org/10.1021/acsaem.2c02618
152. Li Jia, Ran Junhui, Uddin Zaheen, et. al. Determining the Role of the Molecular Weight of Poly(Ethylene Glycol) Additives in Perovskite Photodetectors. ACS Applied Energy Materials,2022,5(10),12158-12164.
https://doi.org/10.1021/acsaem.2c01673
153. Peng Rongcheng, Gao Yang, Younus Hussein A, et. al. Electrochemical CO2-to-Formate Conversion Over Positive Charge Tin Sites. ACS Applied Energy Materials,2022,5(8),9324-9332.
https://doi.org/10.1021/acsaem.2c00504
154. Chen Peng, Wu Chunyang, Wang Zuyong,et. al.Synergistically Boosting Sodium-Storage Performance of Na3V2(PO4)(3) by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks. ACS Applied Energy Materials,2022,5(2),2542-2552.
https://doi.org/10.1021/acsaem.1c04061
155. Liu Zhi, Zhou Hongtao, Zeng Fan, et. al. All-Printed High-Performance Flexible Supercapacitors Using Hierarchical Porous Nickel-Cobalt Hydroxide Inks. ACS Applied Energy Materials,2022.
https://doi.org/10.1021/acsaem.2c00947
156. Fu Hao, Yang Dan, Qiu Di, et. al. Highly Stable 3D Supercuboids to 2D ZnSe Nanosheets: Formation for a High-Efficiency Catalysis System.Journal of Physical Chemistry Letters, 2022,13(7),1855-1862.
https://doi.org/10.1021/acs.jpclett.2c00268
157. Liu Beibei, Jian Zhiyong,Guo Long, et. al. Effect of crystallographic orientations on shock-induced plasticity for CoCrFeMnNi high-entropy alloy. International Journal of Mechanical Sciences,2022,226,107373.
https://doi.org/10.1016/j.ijmecsci.2022.107373
158. Song Zhen-yu,Chen Shi-lin, Du Shuo, et. al. Construction of high-performance LiMn0.8Fe0.2PO4/C cathode by using quinoline soluble substance from coal pitch as carbon source for lithium ion batteries.Journal of Alloys and Compounds,2022,927,166921.
https://doi.org/10.1016/j.jallcom.2022.166921
159. Yang Caili,Ran Yixin, Gao Chenxi, et. al. Hierarchical hybrid architectures assembled from carbon coated Li3VO4 and in-situ generated N-doped graphene framework towards superior lithium storage. Journal of Alloys and Compounds,2022,918,165668.
https://doi.org/10.1016/j.jallcom.2022.165668
160. Yu Yangbo,Yan Hongge,Chen Jihua, et. al.Flow behavior and dynamic transformation of bimodal TC17 titanium alloy during high strain rate hot compression. Journal of Alloys and Compounds,2022,912,165260.
https://doi.org/10.1016/j.jallcom.2022.165260
161. Xiong Lin,Chen Peilin, Chen Yuxi, et. al. Liquid-solid phase separation-generated multifunctional light-weight modification layer of g-C3N4/carbon endowing 5 V cathode material graphite flakes with high capacity and cyclicability simultaneously. Journal of Alloys and Compounds,2022,911,164871.
https://doi.org/10.1016/j.jallcom.2022.164871
162. Su Jinlong,Ji Xiankun, Xie Haiming, et. al. Constitutive and microstructural characteristics of Ti-5Al-2.5Sn alloy during isothermal and non-isothermal multi-stage hot deformation across different phase regions. Journal of Alloys and Compounds,2022,908,164647.
https://doi.org/10.1016/j.jallcom.2022.164647
163. Li Zhenzhen, Yan Hongge,Chen Jihua, et. al. Enhancing damping capacity and mechanical properties of Al-Mg alloy by high strain rate hot rolling and subsequent cold rolling. Journal of Alloys and Compounds,2022,908,164677.
https://doi.org/10.1016/j.jallcom.2022.164677
164. Wang Lin, Chen, Xuli, et. al. NiCo layered double hydroxide on three-dimensional modified graphite paper for high-performance supercapacitors. Journal of Alloys and Compounds, 2022,907,164411.
https://doi.org/10.1016/j.jallcom.2022.164411
165. Xi, H. H., Ming, W. Q.,He, Y., et. al. Unveiling the fine microstructure of nanoscale composite particles embedded in brittle Si phase in an Al-Si-Cu-Mg alloy. Journal of Alloys and Compounds, 2022,906,164238.
https://doi.org/10.1016/j.jallcom.2022.164238
166. Huang Dong,Liu Qianli, Zhang Peng,et. al.Thermal response of the two-directional high-thermal-conductive carbon fiber reinforced aluminum composites with low interface damage by a vacuum hot pressure diffusion method. Journal of Alloys and Compounds, 2022,905,164195.
https://doi.org/10.1016/j.jallcom.2022.164195
167. Lian Shuhan,Li Guohao, Song Fei,et. al.Surfactant-free self-assembled MXene/carbon nanotubes hybrids for high-rate sodium- and potassium-ion storage.Journal of Alloys and Compounds, 2022,901,163426.
https://doi.org/10.1016/j.jallcom.2021.163426
168. Yang Chao,Peng Cancan,Chen Peng,et. al. Insights into electrochemical performances of NiFe2O4 for lithium-ion anode materials.Journal of Alloys and Compounds, 2022,896,163079.
https://doi.org/10.1016/j.jallcom.2021.163079
169. Sang Jianquan, Yuan Ye,Yang Wulin,et. al. Exploring the underlying causes of optimizing thermal conductivity of copper/diamond composites by interface thickness.Journal of Alloys and Compounds, 2022,891,161777.
https://doi.org/10.1016/j.jallcom.2021.161777
170. Yao Bin, Fu Licai, Liao Zheng,et. al. Flexible NiS2 film as high specific capacity cathode for thermal battery. Journal of Alloys and Compounds, 2022,900,163448.
https://doi.org/10.1016/j.jallcom.2021.163448
171. He Liu, Li Zhongtao, Zhang Jun,et. al. Softening Al13Fe4 intermetallic compound through Fe-site multi-principal-element doping. Scripta Materialia,2022,218,114811.
https://doi.org/10.1016/j.scriptamat.2022.114811
172. Yang Yingjian, Li Zhongtao, Zhang Weidong, et. al. Concentration of "Mysterious Solute" in CoCrFeNi high entropy alloy. Scripta Materialia,2022,211,114504.
https://doi.org/10.1016/j.scriptamat.2022.114504
173. Chen Zeye, Lu Ruiqing, Zheng Shuwei, et. al. Microstructural characteristics and deformation behaviors of an Al-Mg-Si alloy with improved strength and conductivity processed by continuous casting and expansion extrusion.Journal of Materials Research and Technology,2023,22,445-460.
https://doi.org/10.1016/j.jmrt.2022.11.156
174. Tang Xiaotian,Shen Shucheng, ChenGang, et. al. High temperature wear resistance of tungsten carbide particle reinforced intermetallic compound matrix composite by in-situ thermite reaction.Journal of Materials Research and Technology,2022,19,4171-4176.
https://doi.org/10.1016/j.jmrt.2022.06.133
175. Sang Jianquan, Chen Qingling, Yang Wulin, et. al. Architecting micron SiC particles on diamond surface to improve thermal conductivity and stability of Al/diamond composites.
Surfaces and Interfaces,2022,31,102019.
https://doi.org/10.1016/j.surfin.2022.102019
176. Yang Lide, Yuan Jianmin, Zhang Pingan, et. al.An interpenetrating-network-like structure in cellulose nanocrystal/polyurethane composites and the relative strengthening mechanism. Cellulose,2022,29(9),5007-5019.
https://doi.org/10.1007/s10570-022-04612-8
177. Zhu Yanlin, Zhang Handong, Liu Heng, et. al. Water-activated formation of porous graphitic carbon nitride with carbon vacancies to boost photocatalytic hydrogen peroxide production. Chemical Communications,2022,58(72),10084-10087.
https://doi.org/10.1039/d2cc02861a
178. Zhou Min,Yin Yao, Shi Yuyan, et. al. Spherical nucleic acid reporter-based cascade CRISPR/Cas12a amplifier for stable and sensitive biosensing of circulating tumor DNA.Chemical Communications,2022,58(28),4508-4511.
https://doi.org/10.1039/d2cc00960a
179. Wu Mouxin, Chen Jihua, Yan Hongge, et. al. Effect of Ca addition on the mechanical properties and thermal conductivity of Mg-2Ga alloy. Materials Science & Engineering A, 2022,861,144322.
https://doi.org/10.1016/j.msea.2022.144322
180. Zhang Feng, Feng Jun, Xiang Wei, et. al. Enhanced mechanical properties in metastable beta titanium alloy via omega-assisted nucleation.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,2022,858,144082.
https://doi.org/10.1016/j.msea.2022.144082
181. Zhang Wanqi, Wang Xianwei,Zhang Rongkai,et. al. Effects of integrated bioceramic and uniaxial drawing on mechanically-enhanced fibrogenesis for bionic periosteum engineering. Colloids and Surfaces B: Biointerfaces,2022,214,112459.
https://doi.org/10.1016/j.colsurfb.2022.112459
182. Wang Jixia, Tian Yabing, Zhang Shiguo, et. al. Chiral porous poly(ionic liquid)s: Facile one-pot, one-step synthesis and efficient heterogeneous catalysts for asymmetric epoxidation of olefins. Applied Catalysis A-General ,2022,631,118477.
183. Su Jinlong, Xie Haiming, Tan Chaolin, et. al. Microstructural characteristics and tribological behavior of an additively manufactured Ti-6Al-4V alloy under direct aging and solution-aging treatments. Tribology International,2022,175,107763.
https://doi.org/10.1016/j.triboint.2022.107763
184. Yu Hongcai,Hou Qingquan, Chen Gongtian, et. al. Ternary doping of Na+, Bi3+ and La3+ to improve piezoelectric constant and electrical resistivity simultaneously in calcium bismuth niobate ceramics.Ceramics International,2023,49(7),10738-10747.
https://doi.org/10.1016/j.ceramint.2022.11.266
185. Li, R., Luo, R. Y., Lin, N.,et. al. A novel strategy for fabricating (Ti,Ta,Nb,Zr,W)(C,N) high-entropy ceramic reinforced with in situ synthesized W2C particles. Ceramics International, 2022,48(21),32540-32545.
https://doi.org/10.1016/j.ceramint.2022.07.242
186. Zhang Wujun, Zhang Xingchang, Xu Pan,et. al. Structure domains induced nonswitchable ferroelectric polarization in polar doubly cation-ordered perovskites.Ceramics International, 2022,48(20),30853-30858.
https://doi.org/10.1016/j.ceramint.2022.07.039
187. Tu Sisi, Wang Qun, Ramachandran, Chidambaram Seshadri,et. al. Parametric investigation of in-situ synthesis of carbon nanotubes on Al2O3 powder by the rotary chemical vapor deposition method.Ceramics International,2022,48(19),28258-28267.
https://doi.org/10.1016/j.ceramint.2022.06.131
188. Liu Cangbao, Cai Chaoyang, Xie Jiawei,et. al. Effect of surface brittle-to-ductile transition on high-temperature thermal shock resistance of Al2O3 ceramics. Ceramics International, 2022,48(14),20627-20638.
https://doi.org/10.1016/j.ceramint.2022.04.032
189. Zhou Hui, Xie Jiawei, Yan Feiyang, et. al. Porous Al(2)O(3 )ceramics with directional gradient pore structure modified by cobweb-bridged WO3 nanowires for oil/water emulsions separation. Ceramics International, 2022,48(13),18753-18764.
https://doi.org/10.1016/j.ceramint.2022.03.150
190. Hou Qingquan, Yang Bin, Ma Chao, et. al. Tailoring structure and piezoelectric properties of CaBi2Nb2O9 ceramics by W6+-Doping.Ceramics International, 2022,48(12),16677-16684.
https://doi.org/10.1016/j.ceramint.2022.02.216
191. Wu Deng-ming, Liu Xiao-pan, Gao Peng-zhao,et. al. Effects of Ni2+ concentration on the composition, structure, magnetic properties, and DC-bias superposition characteristics of NiCuZn ferrites.Ceramics International, 2022,48(8),11228-11237.
https://doi.org/10.1016/j.ceramint.2021.12.343
192. Xie Jiawei,Wang Shuang, Guo Chenxu,et. al. Construction of novel plate-shaped 4H-SiC network skeleton for enhancing 3D-interpenetrated network structure SiC/Al composites. Ceramics International, 2022,48(7),10251-10260.
https://doi.org/10.1016/j.ceramint.2021.12.242
193. Yi Li, Jiang, Haihu, Liang Kui,et. al. Enhanced electrochemical performance of Li-1.2(Ni0.17Co0.07Mn0.56)O-2 via constructing double protection layers by facile phytic acid treatment.Ceramics International, 2022,48(3),3374-3382.
https://doi.org/10.1016/j.ceramint.2021.10.113
194. Yan Feiyang,Tong Liangcheng, Qin Hang,et. al. Controlled synthesis of biomimetic materials with protruding structures by in situ growth of silica nanorods via hydroxyl-localized droplet template method. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2022,651,129705.
https://doi.org/10.1016/j.colsurfa.2022.129705
195. Liu Lu, Li Guo, Ouyang Ting,et. al. 3D carbon networks/NiO nanosheets thick electrodes for high areal capacity lithium ion batteries.Electrochemistry Communications,2022,139,107306.
https://doi.org/10.1016/j.elecom.2022.107306
196. Xia Xinyu, Fu Licai, Luo Zeshunji,et. al. Discharge behavior of NiO as thermal battery cathode at ultrahigh temperature.Electrochemistry Communications,2022,134,107185.
https://doi.org/10.1016/j.elecom.2021.107185
197. Xie Yunfei, Yang Liuli, Du Juan, et. al. Giant Enhancement of Second-Harmonic Generation in Hybrid Metasurface Coupled MoS2 with Fano-Resonance Effect.Nanoscale Research Letters, 2022,17(1),97.
https://doi.org/10.1186/s11671-022-03736-x
198. Tao Tao,Liu Jinshui, Zhou Dianwu,et. al. Influence of laser-Sn powder coupling on microstructure and mechanical properties of fusion welded AZ31B-alloy to DP590-steel.Optics and Laser Technology, 2022,152,108091.
https://doi.org/10.1016/j.optlastec.2022.108091
199. Liu Yue , Liu Jiahao,Yang Jianxiao, et. al. In-situ doping B4C nanoparticles in mesophase pitch for preparing carbon fibers with high thermal conductivity by boron catalytic graphitization. Molecules,2022,27(16),5132.
https://doi.org/10.3390/molecules27165132
200. Ma Jingjing, Cai Chaoyang, Xie Jiawei, et. al. Design and preparation of LiAlSiO4-Al2O3 coating for the oxidation resistance improvement of SiC ceramics.Surface and Coatings Technology,2022,448,128917.
https://doi.org/10.1016/j.surfcoat.2022.128917
201. Lv Jiahui, Cheng Yingliang. Amorphous coatings on tantalum formed by plasma electrolytic oxidation in aluminate electrolyte and high temperature crystallization treatment. Surface and Coatings Technology,2022,434,128171.
https://doi.org/10.1016/j.surfcoat.2022.128171
202. Liu Shuang,Yang Yujie,Qian Yang, et. al. MOF-Derived Potassiophilic CuO Nanoparticles on Carbon Fiber Cloth as Host for Stabilizing Potassium Metal Anode. ChemElectroChem, 2022,9(3), e202101561.
https://doi.org/10.1002/celc.202101561
203. Zhao Xin, Huang Cong,Tang Qunli,et. al. A Simple Approach towards Highly Dense Graphene Films for High Volumetric Performance Supercapacitors. ChemElectroChem, 2022,9(1), e202101451.
https://doi.org/10.1002/celc.202101451
204. Li Ze, Jiang Zhao, Ouyang Ting, et. al. Unveiling the microcrystal structure evolution of carbon fibers induced by thermal soaking of mesophase pitch. Journal of Materials Science, 2022,57(7),4556-4568.
https://doi.org/10.1007/s10853-022-06939-w
205. Wu Huang, Huang Dong, Ye Chong, et. al.Engineering microstructure toward split-free mesophase pitch-based carbon fibers. Journal of Materials Science,2022,57(4),2411-2423.
https://doi.org/10.1007/s10853-021-06770-9
206. Tang Qian, Li Liang,Guo Kunkun,et. al. One-step hydrothermal method produced all graphene fiber electrode for high-performance supercapacitor. International Journal of Energy Research,2022,46(10),14105-14115.
https://doi.org/10.1002/er.8127
207. Chen Hui, Bao Lishi, Ou Changrui, et. al. Highly Dispersed and Small-Size Pd-Cu Nanoparticles Supported on N-Doped Graphene for Oxygen Reduction Reaction Catalysts.Energy and Fuels,2022,36(14),7699-7709.
https://doi.org/10.1021/acs.energyfuels.2c00792
208. Zheng Zhiyang,Hu Zewei, Lou Yikai, et. al. Porosity vs. Carbon Shell Number: Key Factor Actually Affecting the Performance of Multi-shelled Hollow Carbon Nanospheres in Li-S Batteries. Journal of Electroanalytical Chemistry,2022,927,116980.
https://doi.org/10.1016/j.jelechem.2022.116980
209. Liao Yalin, Chen Hui, Ou Changrui, et. al. N, P co-doped graphene enriched phosphorus as a highly efficient oxygen reduction catalyst. Journal of Electroanalytical Chemistry, 2022,921,116560.
https://doi.org/10.1016/j.jelechem.2022.116560
210. Zheng Xiong, Zhang Jie,Lai YuXiang, et. al. Microstructure changes and enhanced properties of an automotive AlMgSi alloy improved by micro-alloying La-addition. Materials Characterization, 2022,194,112331.
https://doi.org/10.1016/j.matchar.2022.112331
211. Tang Jie, He Shudong, Mo Yang, et. al. Revealing the cryogenic-temperature toughness and deformation mechanisms in high manganese austenitic steels. Materials Characterization, 2022,190, 112024.
https://doi.org/10.1016/j.matchar.2022.112024
212. Liu Chunyu, Shen Shucheng, Xie Pan, et. al. Deformation behaviors of a Fe-20Mn-3Al-3Si TRIP steel under quasi-static compression and dynamic impact. Materials Characterization, 2022,191,112095.
https://doi.org/10.1016/j.matchar.2022.112095
213. Chang Shengkai, Han Zhuo, Yang Jianxiao,et. al. Nitrogen-Doped Pitch-Based Activated Carbon Fibers with Multi-Dimensional Metal Nanoparticle Distribution for the Effective Removal of NO. Catalysts, 2022,12(10),1192.
https://doi.org/10.3390/catal12101192
214. Wu Lei, Guo Yafei, Kuang Guoqiang, et. al. Synthesis and electrochromic properties of all donor polymers containing fused thienothiophene derivatives with high contrast and color efʷciency.Polymer,2022,261,125404.
https://doi.org/10.1016/j.polymer.2022.125404
215. Cheng Yingliang, Feng Tian, Cheng Yulin. A Systematic Study of the Role of Cathodic Polarization and New Findings on the Soft Sparking Phenomenon from Plasma Electrolytic Oxidation of an Al-Cu-Li Alloy. Journal of The Electrochemical Society,2022,169(7),071505.
https://doi.org/10.1149/1945-7111/ac82cc
216. He Liu, Zhang Jun, Li Zhongtao,et. al. Toughening (NbTaZrW)C high-entropy carbide ceramic through Mo doping. Journal of the American ceramic society,2022,105(8),5395-5407.
https://doi.org/10.1111/jace.18474
217. Xie Tuanping,Zhou Jing, Cai Li,et. al. Synergistic Effects of Crystal Phase and Strain for N-2 Dissociation on Ru(0001) Surfaces with Multilayered Hexagonal Close-Packed Structures.ACS Omega,2022,7(5),4492-4500.
https://doi.org/10.1021/acsomega.1c06400
218. Han Yuanyuan, Sun Lu, Wen Chenyu,et. al. Flexible conductive silk-PPy hydrogel toward wearable electronic strain sensors. Biomedical Materials,2022,17(2),024107.
https://doi.org/10.1088/1748-605X/ac5416
219. Yan Dingbang, Li Zexian, Kong Nizao,et. al. Multi-scale hybrid spherical graphite composites: a lightweight thermal interface material with high thermal conductivity and simple processing technology.RSC advance,2022,12(45),29414-29422.
https://doi.org/10.1039/d2ra04633d
220. Liu Bo,Chen Ying, Ma Chao, et. al. Gallium doping-assisted giant photoluminescence enhancement of monolayer MoS2 grown by chemical vapor deposition. Applied Physics Letters, 2022,122(20),221902.
https://doi.org/10.1063/5.0096169
221. You Wenxia, Zheng Biyuan, Xu Zheyuan,et. al. Strong interfacial coupling in vertical WSe2/WS2heterostructure for high performance photodetection. Applied Physics Letters,2022, 120,181108.
https://doi.org/10.1063/5.0082101
222. Tian Yabing, Xing Chen, Wang Wenxiang,et. al. A highly crosslinked, mesoporous poly(ionic liquid) containing salen-Pd for efficient, eco-friendly Suzuki-Miyaura coupling reactions.New Journal of Chemistry,2022,46(18),8855-8862.
https://doi.org/10.1039/d2nj00695b
223. Guan Wen, Li Kaihui, Xiao Yulong,et. al. Structural and electronic property engineering in graphene nanowrinkles via scanning tunneling microscopy. Physical Review B, 2022,106(20), 205417.
https://doi.org/10.1103/PhysRevB.106.205417
224. Lu Ruiqing, Zhang Long, Zheng Shuwei,et. al. Microstructure, mechanical properties and deformation mechanisms of an Al-Mg alloy processed by the cyclical continuous expanded extrusion and drawing approach.International Journal of Minerals, Metallurgy and Materials, 2022,29(1),108-118.
https://doi.org/10.1007/s12613-021-2342-y
225. Zhang Jiahui, Qi Yong,Yang Jianxiao,et. al. Molecular structure effects of mesophase pitch and isotropic pitch on morphology and properties of carbon nanofibers by electrospinning. Diamond and Related Materials,2022,126,109079.
https://doi.org/10.1016/j.diamond.2022.109079
226. Li Jian-wei, Fang Wen-jun, Wan Long,et. al. Research on the bonding properties of vitrified bonds with porous diamonds and the grinding performance of porous diamond abrasive tools. Diamond and Related Materials,2022,123,108841.
https://doi.org/10.1016/j.diamond.2022.108841
230. Yang Lei,Ding Ruijiang,Hong Chunshui, et. al. Synthesis, optical and photocatalysis property of ZnO:Tb nanoparticles.Solid State Sciences,2022,131,106957.
https://doi.org/10.1016/j.solidstatesciences.2022.106957
231. Huang Wen-sen, Chen, Ji-hua, Yan Hong-ge, et. al. Solid solution strengthening and damping capacity of Mg−Ga binary alloys.Transactions of Nonferrous Metals Society of China , 2022,32(9),2852-2865.
https://doi.org/10.1016/S1003-6326(22)65988-0
232. 张天宇,程清,竺恒宇等，(Sn1-xZnx)57(In0.78Bi0.22)43低熔点无铅焊料的微观结构表征. Transactions of Nonferrous Metals Society of China, 2022.
https://kns.cnki.net/kcms/detail/43.1239.TG.20220330.1749.018.html
233. 陶韬，刘金水，周惦武等，夹层辅助激光焊接镁/钢异种金属的显微组织与性能.Transactions of Nonferrous Metals Society of China, 2022.
https://kns.cnki.net/kcms/detail/43.1239.tg.20220330.1921.042.html
234. Plasma electrolytic oxidation of brass in aluminate electrolyte containing NaH2PO4 or Na2SiO3. Transactions of Nonferrous Metals Society of China,2022.
https://kns.cnki.net/kcms/detail/43.1239.TG.20220318.1119.004.html
235. Liu Wei,Wu Bo-qiang, Liu Hai-rong, et. al. Simulation on microstructure evolution and mechanical properties of Mg-Y alloys: Effect of trace Y & nbsp.Transactions of Nonferrous Metals Society of China,2022,32(3),812-823.
https://doi.org/10.1016/S1003-6326(22)65835-7
236. Luo Hengjun, Yuan Wuhua, Xiang Wei, et. al. High-Cycle Fatigue Behavior and Corresponding Microscale Deformation Mechanisms of Metastable Ti55511 Alloy with A Basket-Weave Microstructure.Materials,2022,15(20),7144.
https://doi.org/10.3390/ma15207144
237. Bao Chenguang,Zeng Qing, Li Fujin, et. al. Effect of Boron Doping on the Interlayer Spacing of Graphite.Materials,2022,15(12),4203.
https://doi.org/10.3390/ma15124203
238. Xu Hang, Li Yuan,Wu Luoyi, et. al. Effect of Heat Treatments on the Corrosion Resistance of a High Strength Mg-Gd-Y-Zn-Zr Alloy. Materials,2022,15(8),2813.
https://doi.org/10.3390/ma15082813
239. Zou Jialing, Shi Jiangfan, Yang Jianxiao, et. al. Electroless copper plating mechanism of mesophase pitch-based carbon fibers by the grafting modification of silane couple agents. Materials Today Communications,2022,32,104053.
https://doi.org/10.1016/j.mtcomm.2022.104053
240. Li Yuan, Liu Zhibang, Peng Ping, et. al. Spinodal limits of supercooled liquid Al deduced from configuration heredity of crystal clusters. Computational Materials Science,2022,207,111316.
https://doi.org/10.1016/j.commatsci.2022.111316
241. Hu Lanlan, Yang Wulin, Zhu Jiajun, et. al. Flexible and thermal conductive poly (vinylidene fluoride) composites with silver decorated hexagonal boron nitride/silicon carbide hybrid filler. Polymer Composites,2022,43(6),3960-3970.
https://doi.org/10.1002/pc.26670
242. Zhu Congcong, Li Guoai, Hao Shijia, et. al. Thermal Stability of Precipitates in Al-2.8 wt%Cu-1.4 wt%Li Alloy.Metals and Materials International,2022,28(12),2898-2906.
https://doi.org/10.1007/s12540-022-01187-8
243. Wang, Zuyong, Liu Song, Hu Wei, et. al. Advanced materials for flexible electronics.Materials Technology,2022,37(12),1969-1970.
https://doi.org/10.1080/10667857.2022.2123167
244. Guo Ting, Liu Peng,Du Ling, et. al. Electrohydrodynamic jet printing via low-solute concentration inks for enhanced positioning accuracy.Materials Technology, 2022,37(13),2743-2751.
https://doi.org/10.1080/10667857.2022.2072605
245. Zhong Fang, Liu Jiabin, Xu Pan, et. al. Biocompatible composite for strain sensor engineering via temperature regulation on single-axial drawing.Materials Technology, 2022,37(12),2022-2031.
https://doi.org/10.1080/10667857.2022.2072607
246. Wang Feng, Luo Yikuan,Liu Peng, et. al. Improved Cycling Performance and High Rate Capacity of LiNi0.8Co0.1Mn0.1O2 Cathode Achieved by Al(PO3)3 Modification via Dry Coating Ball Milling.Coatings,2022,12(3),319.
https://doi.org/10.3390/coatings12030319
247. Wang Qun, Tu Sisi, Rao Yuqin,et. al. The Influence of Polymeric Sealing Treatment on the Wear Performance of PEO Coating Deposited on AZ31 Mg Alloy. Coatings,2022,12(2),182.
https://doi.org/10.3390/coatings12020182
248. Xu Yuxuan, Tu Chuanjun, Liu Yanli, et. al. Superior tribology property of zinc phosphate impregnated graphite block at high- temperature oxidative friction. Carbon Letters, 2022,32(5),1365-1376.
https://doi.org/10.1007/s42823-022-00363-5
249. Gou, Genchang, Wei Wenjie, Yang Jianxiao, et. al. Effect of anion species on preparation and properties of pitch‑based activated carbon fibers by in-situ catalytic activation of metal nanoparticles. Carbon Letters, 2022,32(6),1507-1518.
https://doi.org/10.1007/s42823-022-00375-1
250. Ma Yingdi, Liu Yanli. Preparation of graphene-ZnO composite with enhanced photocatalytic performance.Carbon Letters,2022,32(5),1265-1275.
https://doi.org/10.1007/s42823-022-00349-3
251. Lou Jiankun, Yang Lide, WeiTao, et. al. Synergistic effect of silicon-containing groups on the self-healing performance of polyurethanes based on disulfide bonds. Journal of applied polymer science,2022,139(40),e52954.
https://doi.org/10.1002/app.52954
252. Li Shi-Yong, Shen Ruo-Han,He Yu-Tao, et. al. Quantitative Electron Tomography for Accurate Measurement of Precipitates Microstructure Parameters in Al-Cu-Li Alloys. Acta Metallurgica Sinica-English Letters, 2022,35(11),1882-1894.
https://doi.org/10.1007/s40195-022-01411-9
253. Shen Shucheng, Wu Cuilan, Xie Pan, et. al. Positive Strain Rate Sensitivity and Deformation Behavior of a Fe-29Mn-3Al-3Si TWIP Steel. Acta Metallurgica Sinica-English Letters, 2022, 35(11), 1825-1836.
https://doi.org/10.1007/s40195-022-01416-4
254. He Jiale,Chen Jihua,Yan Hongge, et. al. Effects of Zn/Ga ratio on microstructure, mechanical, damping and thermal properties of Mg-Zn-Ga alloy solid solutions. Journal of Materials Research, 2022,37(10),1727-1738.
https://doi.org/10.1557/s43578-022-00572-8
255. Guo Xiaoshuai,Gan Xianglai, Niu Haiyang, et. al. Unraveling the mechanisms of aluminum solidification under hyper-gravity condition from molecular dynamics simulations. Journal of Applied Physics,2022,132(2),025101.
https://doi.org/10.1063/5.0090633
256. Wang Shuang, Qin Hang, Cai Chaoyang, et. al. Microwave dielectric properties of BaCu2-xMnxSi2O7 (x=0-0.04) ceramics. Journal of Materials Science: Materials in Electronics, 2022,33(18),14593-14604.
https://doi.org/10.1007/s10854-022-08380-w
257. Zhang Yifan,Yuan Dingwang, Ma Lei, et. al. Crack growth in zirconium single crystal under cyclic loading: A molecular dynamics simulation.Physics Letters A,2022,455,128506.
https://doi.org/10.1016/j.physleta.2022.128506
258. Deng Xiaojuan, Xiao Yudi, Ma Yiwu,et. al. The Microstructural Evolution of Nickel Single Crystal under Cyclic Deformation and Hyper-Gravity Conditions: A Molecular Dynamics Study.
Metals,2022,12(7),1128.
https://doi.org/10.3390/met12071128.
259. Hu Nengwen, Huang Yongfeng, Wang, et. al. Kun Solidification of Undercooled Liquid under Supergravity Field by Phase-Field Crystal Approach.Metals,2022,12(2),232.
https://doi.org/10.3390/met12020232
260. Wang Li, Wang Zhen, Xia Yaping, et. al. Effects of Point Defects on the Stable Occupation, Diffusion and Nucleation of Xe and Kr in UO2.Metals,2022,12(5),789.
https://doi.org/10.3390/met12050789
261. Xiao Zigen, Huang Yun, Liu Zhixiao,et. al. The Role of Grain Boundaries in the Corrosion Process of Fe Surface: Insights from ReaxFF Molecular Dynamic Simulations. Metals,2022,12(5),876.
https://doi.org/10.3390/met12050876
262. Xiao Yudi, Deng Xiaojuan, Ma Yiwu,et. al. Molecular dynamics study of fatigue behavior of nickel single-crystal under cyclic shear deformation and hyper-gravity condition.Modelling and Simulation in Materials Science and Engineering,2022,30(5),055006.
https://doi.org/10.1088/1361-651X/ac6e7b
263. Wang Xian-peng, Hu Ai-ping, Chen Xiao-hua,et. al. A 3D graphene/polyimide fiber framework with improved thermal conductivity and mechanical performance.Journal of Central South University,2022,29(6),1761-1777.
https://doi.org/10.1007/s11771-022-5047-0
264. Chen Zhikui, Ming Wenquan, He Yutao,et. al. Direct estimation and correction of residual aberrations in the reconstructed exit-wavefunction of a crystalline specimen. Micron, 2022,157, 103247.
https://doi.org/10.1016/j.micron.2022.103247
265. Nie Yang, Yan Hongge, Chen Jihua, et. al. Effects of Ga on microstructure and mechanical properties of HSRRed Mg-Zn-Zr alloys.Materials Science and Technology,2022,38(18),1651-1658.
https://doi.org/10.1080/02670836.2022.2098621
266. Ding Tian, Yan Hongge, Chen Jihua,et. al. Microstructure Evolution and Recrystallization Mechanisms of High Mg Alloyed Al-Mg Alloy during Friction Stir Welding with Different Cooling Media.Journal of Materials Engineering and Performance,2022.
https://doi.org/10.1007/s11665-022-07349-4
267. Zhang Meng, Yan Hongge, Li, Qiang,et. al. Enhancing Mechanical Properties of Mg-6.0Gd-1.0Y-0.5Zr Alloy by Thermomechanical Treatment. Journal of Materials Engineering and Performance,2022.
https://doi.org/10.1007/s11665-022-07231-3
268. Ren Gaimei, Tu Chuanjun, Liu, Yanli,et. al. Preparation of WS2 with Varying Thickness and Its Enhanced Anti–wear Property in Resin-Based Carbon Composites. Journal of Materials Engineering and Performance,2022.
https://doi.org/10.1007/s11665-022-07372-5
269. He Jiale,Chen Jihua,Yan, Hongge, et. al. Effect of Zn/Ga Ratio on Damping and Thermal Behaviors of Fine-Grained Mg-Zn-Ga Sheets.Journal of Materials Engineering and Performance,2022,31(7),5201-5211.
https://doi.org/10.1007/s11665-022-06605-x
270. Xie Linjun,Yuan Wuhua. Effect of regression and re-aging treatment on tensile yield strength anisotropy of 7050 aluminum alloy.Materials Research Express,2022,9(4),046528.
https://doi.org/10.1088/2053-1591/ac68d5
271. Zhang Wujun, Jin Feng, Zhang Xingchang, et. al. Epitaxial-strain-dependent reorientation o oxygen octahedral tilting axis in manganite films. EPL,2022,137(3),36002.
https://doi.org/10.1209/0295-5075/ac5361
272. Liang Jieyuan, Zhu Xiaoli, Chen Mingxing, et. al. Controlled Growth of Two-Dimensional Heterostructures: In-Plane Epitaxy or Vertical Stack.Accounts of Materials Research, 2022,3(10),999-1010.
https://doi.org/10.1021/accountsmr.2c00096
273. Fu Qiang, Feng Jun, Xiang Wei, et. al. Microstructure Characteristic and Texture Evolution of TB18 Titanium Alloy during Hot Compression in the ? Phase Zone. Materials Transactions, 2022,63(10),1416-1424.
https://doi.org/10.2320/matertrans.MT-M2022068
274. Mao, G., Wu, Z., Liu, S.,et. al. Effects of antimony on eutectic silicon and fracture mode of A357 alloy at different cooling rates.Materialwiss. Werkstofftech, 2022,53(8),897-905.
https://doi.org/10.1002/mawe.202100210
275. Huang Zhen, Yuan Wuhua, Zhu Jiajia,et. al. Low Temperature Stress Relaxation and Morphology Evolution of Ti-6.5Al-2Zr-1Mo-1V Titanium Alloys.Rare Metal Materials and Engineering,2022,51(1),83-91.
https://www.webofscience.com/wos/woscc/full-record/WOS:000759031700013
276. Xiao Yu, Qu Junyu, Luo, Ziyu,et. al. Van der Waals epitaxial growth and optoelectronics of a vertical MoS2/ WSe2 p-n junction. Frontier of Optoelectronics, 2022,15(1),41.
https://doi.org/10.1007/s12200-022-00041-4
277. 李梓维,张安,黄建华等, 高稳定的溴铅铯量子点制备及发光二极管应用,湖南大学学报。
https://doi.org/10.1002/MARC.20210052
278. 陈刚,邓人钦,贾寓真等，高速钢复合材料的制备与性能，有色金属工程。
https://doi.org/10.3969/j.issn.2095-1744.2022.08.05
279. 刘嘉浩,曹俊,李程飞等，沥青粘结剂对低阶煤基活性焦制备及性能的影响，煤炭加工与综合利用。
https://doi.org/10. 16200 /j. cnki. 11-2627 /td. 2022. 07. 017
280. 吴昊,陈刚,唐啸天等，Cu含量对CoCrFeNiMnAlCux高熵合金微观组织及性能的影响，有色金属工程。
https://doi.org/10.3969/j.issn.2095-1744.2022.07.01
281. 戴智博,曹欣磊,徐昆等，石墨晶体的辐照缺陷及晶体尺寸变化研究进展，炭素技术。
https://doi.org/10.14078/j.cnki.1001-3741.2022.03.001
282. 韩磊,刘雪涛,何广灵. CoFe-B-P纳米颗粒的制备及其电化学析氧性能研究，湖南大学学报(自然科学版).
https://doi.org/10.16339/j.cnki.hdxbzkb.2022304
283. 喻楚英,汤顺和,张志成等，高强度电活性MXene/TA/ANF复合膜的制备及电化学性能,湖南大学学报(自然科学版).
https://doi.org/10.16339/j.cnki.hdxbzkb.2022305
284. Yang Furong, Gao lei,Lai Wenchuan,et. al., Recent advance on structural design of high-performance Pt-based nanocatalysts for oxygen reduction reaction.Advanced Sensor and Energy Materials, 2023,2(1),100022.
https://doi.org/10.1016/j.asems.2022.100022.
285. 高朋召,张佩,李玉玲等，交流磁场对M-BTC 材料电化学氮还原(NRR)性能的影响,湖南大学学报（自然科学版）。
https://doi.org/10.16339/j.cnki.hdxbzkb.2022303
286. 杨洲,鲍晨光,陈玉喜等，热处理温度对针状焦的结构及电化学性能的影响，炭素技术。
https://doi.org/10.14078/j.cnki.1001-3741.2022.02.008
287. 张纪正,韩方超,陈玉喜等，双离子电池正极材料石墨片和石墨颗粒的电化学性能研究，炭素技术。
https://doi.org/10.14078/j.cnki.1001-3741.2022.02.004
288. 陈惠,廖亚林,王日雷等，微晶石墨制备石墨烯及其在锂离子电池导电浆料中的应用研究，炭素技术。
https://doi.org/10.14078/j.cnki.1001-3741.2022.02.005
289. 刘辛欣,喻楚英.桃胶基氮掺杂多孔炭的性能，电池.
https://doi.org/10.19535/j.1001-1579.2022.02.002
290. 李玉玲,王垣力,李冬云等，外交变磁场对碳纸原位负载MOFs衍生氮掺杂多孔碳OER性能的影响,粉末冶金材料科学与工程。
https://doi.org/10.19976/j.cnki.43-1448/TF.2021094
291. Deng Shiwei, Wu Jianfang, Shi Tuo. Defect chemistry analysis of solid electrolytes：Point defects in grain bulk and grain boundary space-charge layer. Energy Storage Science and Technology,2022,3(11).
https://doi.org/10.19799/j.cnki.2095-4239.2021.0724
292. 陈刚,姚远超,贾寓真等，热处理工艺对双金属带锯条背材30Cr4MoNiV钢组织和性能的影响.金属热处理.
https://doi.org/10.13251/j.issn.0254-6051.2022.01.044
293. Zhu Chao, Tu Jian, Ding Yuanli, et.al. Recent Progress on Na3V2(PO4)2F3 Cathodes for Na-Ion Batteries.Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society,2022,50(1).
https://doi.org/10.14062/j.issn.0454-5648.20210759
合作论文
1. Zhao Shuoqing, Liu Zhichao, Xie Guanshun,et.al. High-efficiency cathode potassium compensation and interfacial stability improvement enabled by dipotassium squarate for potassium-ion batteries. Energy & Environmental Science,2022,15(7),3015-3023.
https://doi.org/10.1039/d2ee00833e
2. Wu Mengqian, Wang Jiang, Liu Zhaozhao,et.al. Engineering Co-P Alloy Foil to a Well-Designed Integrated Electrode Toward High-Performance Electrochemical Energy Storage. Advanced Materials,2022,35(7).
https://doi.org/10.1002/adma.202209924
3. Li Ruichun, Xu Changhong, Wu Xibing, et.al. Aluminum-ion storage reversibility in a novel spinel Al2/3Li1/3Mn2O4 cathode for aqueous rechargeable aluminum batteries.Energy Storage Materials,2022,53,514-522.
https://doi.org/10.1016/j.ensm.2022.09.034
4. Yu Jiahao, Liu Qi, Hu Xia, et.al. Smart construction of multifunctional Li1.5Al0.5Ge1.5(PO4)(3)|Li intermediate interfaces for solid-state batteries. Energy Storage Materials,2022,46,68-75.
https://doi.org/10.1016/j.ensm.2021.12.043
5. Meng Tao,Li Bo, Liu Cong, et.al. Molecular cooking: Amino acids trap silicon in carbon matrix to boost lithium-ion storage. Energy Storage Materials,2022,46,344-351.
https://doi.org/10.1016/j.ensm.2022.01.005
6. Peng Chi, Zhang Ying,Yang Shanchen, et.al. Flexible zincophilic polypyrrole paper interlayers for stable Zn metal anodes: Higher surface flatness promises better reversibility. Nano Energy, 2022,98,107329.
https://doi.org/10.1016/j.nanoen.2022.107329
7. Liu Hao-Xin, Li Shan-Qing,Wang Wei-Wei, et.al. Partially sintered copper-ceria as excellent catalyst for the high-temperature reverse water gas shift reaction. Nature Communications,2022,13(1),867.
https://doi.org/10.1038/s41467-022-28476-5
8. Fan Xiaoyong, Yang Huan, Feng Bin, et.al. Rationally designed In@Zn@In trilayer structure on 3D porous Cu towards high-performance Zn-Ion batteries. Chemical Engineering Journal,2022,445(1),136799.
https://doi.org/10.1016/j.cej.2022.136799
9. Cheng Yuanmeng, Han Yuxin, Zhang Wei, et.al. Gram-scale synthesis of boron nitride nanosheets by salt-template method for anticancer drug delivery. Chemical Engineering Journal, 2022,437(1),135304.
https://doi.org/10.1016/j.cej.2022.135304
10. Ali Mustehsin, Zhao Ting, Iqbal Sundas, et.al. Threading the MOF-Derived Mesoporous Carbon Host with CNT Network: An Effective Modification Layer for High-Areal-Capacity Li Metal Anodes. Chemical Engineering Journal,2022,431(2),134194.
https://doi.org/10.1016/j.cej.2021.134194
11. Zheng Yiqun, Zhang Jiawei, Ma Zesong, et.al. Seeded Growth of Gold-Copper Janus Nanostructures as a Tandem Catalyst for Efficient Electroreduction of CO2 to C2+ Products. Small,2022,18(19),2201695.
https://doi.org/10.1002/smll.202201695
12. Xiang Li, Wang Yuru, Xia Fan,et.al. An epidermal electronic system for physiological information acquisition, processing, and storage with an integrated flash memory array. Science Advances,2022,8(23),eabp8075.
https://doi.org/10.1126/sciadv.abp8075
13. Qi Ruoxuan,Yang Chao, Ma Liujia,et.al. Less is more: tiny amounts of insoluble multi-functional nanoporous additives play a big role in lithium secondary batteries. Journal of Materials Chemistry A,2022,10(14),8047-8058.
https://doi.org/10.1039/d1ta10134j
14. Ling Liming, Wang Xiwen, Li Yu, et.al. Monoclinic Cu-3(OH)(2)V2O7 center dot 2H(2)O nanobelts/reduced graphene oxide: A novel high-capacity and long-life composite for potassium-ion battery anodes. Journal of Energy Chemistry, 2022,66,140-151.
https://doi.org/10.1016/j.jechem.2021.07.025
15. Wang Futing, Hou Yangyang, Tan Xuecai,et.al. Real-time multiple signal amplification self-powered biosensing platform for ultrasensitive detection of MicroRNA. Biosensors and Bioelectronics,2023,222,114933.
https://doi.org/10.1016/j.bios.2022.114933
16. Zhang Jun, Xu Biao, Xiong Yaoxu, et.al. Design high-entropy carbide ceramics from machine learning. npj Computational Materials,2022,8(1),5.
https://doi.org/10.1038/s41524-021-00678-3
17. Wu Yiping, Jia Yuzhen, Zhang Sha, et.al. Flow softening and dynamic recrystallization behavior of a Mg-Gd-Y-Nd-Zr alloy under elevated temperature compressions. Journal of Magnesium and Alloys,2021.
https://doi.org/10.1016/j.jma.2021.11.009
18. Fan Xiaoying, Chen Peng, Yin Xu, et.al. One Stone for Multiple Birds: A Versatile Cross-Linked Poly(dimethyl siloxane) Binder Boosts Cycling Life and Rate Capability of an NCM 523 Cathode at 4.6 V. ACS Applied Materials & Interfaces,2022,14(14),16245-16257.
https://doi.org/10.1021/acsami.2c01245
19. Wang, S. B., Pan, C. F., Wei, B.,et.al. Nano-phase transformation of composite precipitates in multicomponent Al-Mg-Si(-Sc) alloys. Journal of Materials Science and Technology, 2022, 110, 216-226.
https://doi.org/10.1016/j.jmst.2021.09.037
20. Xiong Yongnan, Hu Wangyu, Shu Yao,et.al. Atomistic simulation on the generation of defects in Cu/SiC composites during cooling.Journal of Materials Science and Technology,2022,123,1-12.
https://doi.org/10.1016/j.jmst.2021.10.058
21. Hong Chengyi, Chen Lingling, Huang Jiayi,et.al. Gold nanoparticle-decorated MoSe2 nanosheets as highly effective peroxidase-like nanozymes for total antioxidant capacity assay. Nano Research,2022.
https://doi.org/10.1007/s12274-022-5328-9
22. Wang Han, Ou Weicheng, Zhong Huiyu,et.al. Exploring precise deposition and influence mechanism for micro-scale serpentine structure fiber. Advances in Nano Research, 2022,12(2),151-165.
https://doi.org/10.12989/anr.2022.12.2.151
23. Zhu Shaoshen, Hou Jianfeng, Liu Chang,et.al. An engineered tenogenic patch for the treatment of rotator cuff tear. Materials and Design,2022,224,111402.
https://doi.org/10.1016/j.matdes.2022.111402
24. Zhou Xiaoyan, Li Xiaogang, Li Zhuo,et.al. Ten micrometer thick polyethylene separator modified by α-LiAlO2@γ-Al2O3 nanosheets for simultaneous suppression of Li dendrite growth and polysulfide shuttling in Li-S batteries. Materials Today Energy,2022,26,100990.
https://doi.org/10.1016/j.mtener.2022.100990
25. Wang Ruixin, Li Li, Tang Yu,et.al. Phase dissolution strengthens and ductilizes a high-entropy alloy. Science China-Materials,2022.
https://doi.org/10.1007/s40843-022-2254-8
26. Yang Kaixuan, Li Yueyue, Wang Ruonan,et.al. Synthesis of Dual-Active-Sites Ni-Ni2In catalysts for selective hydrogenation of furfural to furfuryl alcohol. FUEL,2022,325,124898.
https://doi.org/10.1016/j.fuel.2022.124898
27. Hong Chengyi, Wang Jingjing, Wang Yuying,et.al. Fluorescence detection of milk allergen ß-lactoglobulin based on aptamer and WS2 nanosheets. Journal of Materials Chemistry B, 2022,35.
https://doi.org/10.1039/D2TB00263A
28. Li Yueyue,Wang Ruonan, Huang Bowen,et.al. Hydrogenation and hydrogenolysis of 5-hydroxymethylfurfural to 2,5-dimethylfuran via synergistic catalysis of Ni2In and acid-base sites.
Applied Surface Science,2022,604.
https://doi.org/10.1016/j.apsusc.2022.154579
29. Ge Jia, Ma Demiao,Duan Guohang,et.al. A novel probe for tetracyclines detection and its applications in cell imaging based on fluorescent WS2 quantum dots. Analytica Chimica Acta, 2022,1221,340130.
https://doi.org/10.1016/j.aca.2022.340130
30. Zhang Haifeng, Qiao Yan, Wang Yingying,et.al. In situ oxidative etching-enabled synthesis of hollow Cu2O nanocrystals for efficient CO2RR into C2+ products.Sustainable Energy & Fuels, 2022,6(21),4860-4865.
https://doi.org/10.1039/d2se01174c
31. Xiong Yongnan, Hu Wangyu, Shu Yao,et.al. Atomistic studies of the responses of composites with thermal residual stresses and defects under uniaxial loading. Journal of Alloys and Compounds,2022,901,163664.
https://doi.org/10.1016/j.jallcom.2022.163664
32. Chen Wanglin, Huang Yonghao, Xiao Hui,et.al. The thermal process for hardening the nitrocarburized layers of a low-carbon steel. Scripta Materialia,2022,210,114467.
https://doi.org/10.1016/j.scriptamat.2021.114467
33. Luo Yajun, Zhang Zhenlin, Zhou Li,et.al. Microstructures and mechanical properties of A356-SiCp/A356 cladding composite materials prepared by vacuum Solid-Liquid casting.Journal of Materials Research and Technology-JMR&T,2022,19,4881-4889.
https://doi.org/10.1016/j.jmrt.2022.07.002
34. Hong Chengyi, Li Dandan, Cao Siying, et.al. Sensitive and multicolor detection of nitrite based on iodide-mediated etching of gold nanostars.Chemical Communications, 2022,58(93), 12983-12986.
https://doi.org/10.1039/d2cc05421c
35. Liu Ruizhe,Yang Chao, Huang Zixuan,et.al. Unraveling Sequence Effect on Glass Transition Temperatures of Discrete Unconjugated Oligomers. Macromolecular rapid communications, 2022,43(4),2100666.
https://doi.org/10.1002/marc.202100666
36. Chen Hongyu, Wang Lin,He Liu,et.al. Oxidation behavior of (NbTaZrW)C high-entropy carbide at 800-1000 ℃.Materials Characterization,2022,189,111932.
https://doi.org/10.1016/j.matchar.2022.111932
37. Xie Chao, Guo Ting, Wang Wei,et.al. Scaffold engineering with flavone-modified biomimetic architecture for vascular tissue engineering applications. Tissue Engineering and Regenerative Medicine,2022,19(4),755-767.
https://doi.org/10.1007/s13770-022-00448-2
38. Yang Yadong, Yang Sujie, Jiang Shudong,et.al. Facile synthesis of zinc-containing mesoporous silicate from iron tailings and enhanced fire retardancy of rigid polyurethane foam. Macromolecular Materials and Engineering,2022.
https://doi.org/10.1002/mame.202200586
39. Mori Manami, Guo Ting,Yamanaka Kenta,et.al. The significance of thermomechanical processing on the cellular response of biomedical Co–Cr-Mo alloys.Journal of the Mechanical Behavior of Biomedical Materials,2022,133,105360.
https://doi.org/10.1016/j.jmbbm.2022.105360
40. Huang Jinpeng, Tang Minglei, Zhou Binru,et.al. GaN-based resonant cavity micro-LEDs for AR application.Applied physics Letters,2022,121(20),201104.
https://doi.org/10.1063/5.0117568
41. Wang Jiaming, Wu Hao, Liu Zhixiao,et.al. Theoretically evaluating two-dimensional tetragonal Si2Se2 and SiSe2 nanosheets as anode materials for alkali metal-ion batteries.Physical Chemistry Chemical Physics,2022,24(42),26241-26253.
https://doi.org/10.1039/d2cp02782h
42. Wen Xi, Jiang Kang,Zhang Heng,et.al. Flexible and Wearable Zinc-Ion Hybrid Supercapacitor Based on Double-Crosslinked Hydrogel for Self-Powered Sensor Application. Materials, 2022,15(5),1767.
https://doi.org/10.3390/ma15051767
43. Zhao Lu, Tang Jiang, Zhou Min,et.al. A review of the coefficient of thermal expansion and thermal conductivity of graphite.New Carbon Materials,2022,37(3),544-555.
https://doi.org/10.1016/S1872-5805(22)60603-6
44. Su Jinlong, Tan Chaolin, Ng Fern Lan, et.al.Additive manufacturing of novel heterostructured martensite-austenite dual-phase steel through in-situ alloying. Materials Today Communications, 2022,33,104724.
https://doi.org/10.1016/j.mtcomm.2022.104724
45. Wang Bo-wen,Lu Jia-zheng,Gao Peng-zhao, et.al. Study on the high impulse current withstand properties and failure mechanism of ZnO varistors with different Bi2O3 content.Journal of Materials Science: Materials in Electronics,2022,33(33),25446-25462.
https://doi.org/10.1007/s10854-022-09249-8
46. Luo Fang-fang, Liu Peng, Qiu Tie-cheng,et.al. Effects of femtosecond laser micropatterning on the surface properties and cellular response of biomedical tantalum-blended composites.Journal of Central South University,2022,29(10),3376-3384.
https://doi.org/10.1007/s11771-022-5155-x
47. Ma Lei,Fei Peng,Li Changsheng,et.al. Analysis of fatigue crack propagation mechanism of Ni3Al under supergravity at atomic size.AIP Advances,2022,12(6),065223.
https://doi.org/10.1063/5.0090428
48. 苏金龙,陈乐群,谭超林等，基于机器学习的增材制造过程优化与新材料研发进展.中国激光.2022,49(14),1402101.
https://doi.org/10.3788/CJL202249.1402101
49. Zhao lu,Tang Jiang, Zhou Min,et.al. A review of the coefficient of thermal expansion and thermal conductivity of graphite. New Carbon Materials,2022,37(3), 544-555.
https://doi.org/10.1016/S1872-5805(22)60603-6
50. Rehnlund David, Wang Zhaohui, Nyholm Leif,et.al. Lithium-diffusion induced Capacity Losses in Lithium-Based Batteries.Advanced Materials,2022,34(19),2108827.
https://doi.org/10.1002/adma.202108827
51. Lin Kui, Xu Xiaofu, Qin Xianying, et.al.Commercially Viable Hybrid Li-Ion/Metal Batteries with High Energy Density Realized by Symbiotic Anode and Prelithiated Cathode.Nano-micro letters, 2022,14(1)149.
https://doi.org/10.1007/s40820-022-00899-1
52. Wu Junru,Gao Ziyao,Wang Yao, et.al. Electrostatic Interaction Tailored Anion-Rich Solvation Sheath Stabilizing High-Voltage Lithium Metal Batteries.Nano-micro letters, 2022,14(1).
https://doi.org/10.1007/s40820-022-00896-4
53. Wang Yuxiang, Chen Daoming,Zhang Jingnan, et.al. Charge Relays via Dual Carbon-Actions on Nanostructured BiVO4 for High Performance Photoelectrochemical Water Splitting. Advanced Functional Materials,2022,32(13),2112738.
https://doi.org/10.1002/adfm.202112738
54. Wang Qiyou,Liu Kang, Hu Kangman,et.al. Attenuating metal-substrate conjugation in atomically dispersed nickel catalysts for electroreduction of CO2 to CO. Nature Communications, 2022,13(1),6082.
https://doi.org/10.1038/s41467-022-33692-0
55. Liu Hao-Xin, Li Jin-Ying, Qin Xuetao,et.al. Pt-n-O-v synergistic sites on MoOx/gamma-Mo2N heterostructure for low-temperature reverse water-gas shift reaction.Nature Communications, 2022,13(1),5800.
https://doi.org/10.1038/s41467-022-33308-7
56.Xu Kai, Ma Chao, Yan Han,et.al. Catalytically efficient Ni-NiOx-Y2O3 interface for medium temperature water-gas shift reaction.Nature Communications, 2022,13(1),2443.
https://doi.org/10.1038/s41467-022-30138-5
56. Chen Shanyong, Li Xiaoqing, Kao Cheng-Wei,et.al. Unveiling the Proton-Feeding Effect in Sulfur-Doped Fe-N-C Single-Atom Catalyst for Enhanced CO2 Electroreduction. Angewandte Chemie International Edition,2022,61(32),e202206233.
https://doi.org/10.1002/anie.202206233
57. Chen Shanyong, Luo Tao, Li Xiaoqing,et.al. Identification of the Highly Active Co-N-4 Coordination Motif for Selective Oxygen Reduction to Hydrogen Peroxide. Journal of the American Chemical Society,2022,144(32),14505-14516.
https://doi.org/10.1021/jacs.2c01194
58. Li Shaowei,Czap Gregory, Li Jie,et.al. Confinement-Induced Catalytic Dissociation of Hydrogen Molecules in a Scanning Tunneling Microscope. Journal of the American Chemical Society, 2022,144(22),9618-9623.
https://doi.org/10.1021/jacs.2c00005
59. Bian Shi, Liu Qian,Zhang Xue,et.al. Fabricating Black-Phosphorus/Iron-Tetraphosphide Heterostructure via a Solid-Phase Solution-Precipitation Method for High-Performance Nitrogen Reduction.Small,2022,18(39).2203284.
https://doi.org/10.1002/smll.202203284
60. Kang Ting,Jin Zijing,Han Xu,et.al. Band Alignment Engineering by Twist Angle and Composition Modulation for Heterobilayer.Small,2022,18(29),2202229.
https://doi.org/10.1002/smll.202202229
61. Tang Lei, Yu Liang, Ma Chao, et.al. Three-dimensional CoOOH nanoframes confining high-density Mo single atoms for large-current-density oxygen evolution. Journal of Materials Chemistry A,2022,10(11),6242-6250.
https://doi.org/10.1039/d1ta09729f
62. Kabiraz Mrinal Kanti, Ruqia Bibi,Kim Jeonghyeon, et.al. Understanding the Grain Boundary Behavior of Bimetallic Platinum-Cobalt Alloy Nanowires toward Oxygen Electro-Reduction. ACS Catalysis,2022,12(6),3516-3523.
https://doi.org/10.1021/acscatal.1c05766
63. Cao Maoqi, Liu Kang, Song Yao, et.al. Regulating local charges of atomically dispersed Moδ+ sites by nitrogen coordination on cobalt nanosheets to trigger water dissociation for boosted hydrogen evolution in alkaline media.Journal of Energy Chemistry,2022,72,125-132.
https://doi.org/10.1016/j.jechem.2022.04.046
64. Xia Fan, Xia Tian,Xiang Li, et.al. Carbon Nanotube-Based Flexible Ferroelectric Synaptic Transistors for Neuromorphic Computing. ACS Applied Materials and Interfaces,2022.
https://doi.org/10.1021/acsami.2c07825
65. Xia Fan, Xia Tian, Xiang Li, et.al. High-Performance Carbon Nanotube-Based Transient Complementary Electronics. ACS Applied Materials and Interfaces,2022,14(10),12515-12522.
https://doi.org/10.1021/acsami.1c23134
66. Zhang Guodong, Zheng Yifan,Shi Yifeng, et.al. Improving the Performance of Perovskite Solar Cells with Insulating Additive-Modified Hole Transport Layers. ACS Applied Materials and Interfaces,2022,14(9),11500-11508.
https://doi.org/10.1021/acsami.1c24349
67. Lai Xiao-Meng,Xiao Qi,Ma Chao, et.al. Heterostructured Ceria-Titania-Supported Platinum Catalysts for the Water Gas Shift Reaction. ACS Applied Materials and Interfaces,2022,14(6),8575-8586.
https://doi.org/10.1021/acsami.1c22795
68. Chen Shuying, Li Weidong, Wang Ling, et.al. Stress-controlled fatigue of HfNbTaTiZr high-entropy alloy and associated deformation and fracture mechanisms. Journal of Materials Science & Technology,2022,114,191-205.
https://doi.org/10.1016/j.jmst.2021.10.026
69. Zhao Junkai, Wei Daina,Zhang Xiaobao, et.al. Biomass-derived hierarchical N, P codoped porous 3D-carbon framework@TiO2 hybrids as advanced anode for lithium ion batteries. Journal of Colloid and Interface Science,2022,606,577-587.
https://doi.org/10.1016/j.jcis.2021.08.005
70. Ge Yilin, Li Yushan, Wang Feng, et.al. Superior high-rate and cycle performances of a single-phase ferrous orthophosphate Na1.2Fe4(PO4)3 anode material for lithium-ion batteries. Journal of Power Sources,2022,535,231447.
https://doi.org/10.1016/j.jpowsour.2022.231447
71. Wang Ruixin,Tang Yu,Lei Zhifeng, et.al. Achieving high strength and ductility in nitrogen-doped refractory high-entropy alloys.Materials and Design,2022,213,110356.
https://doi.org/10.1016/j.matdes.2021.110356
72. Kobayashi S., Takahashi Y. K., Ishigami, K., et.al. Multimodal analysis of Zr substitution effects on magnetic and crystallographic properties in (Sm1−xZrx)(Fe0.8Co0.2)12 compounds with ThMn12 structure. Acta Materialia,2023,242,118454.
https://doi.org/10.1016/j.actamat.2022.118454
73. Fu Xiaoling, Deng RiQiu, Kong XiangBin, et.al. Interfacial characterization and its influence on the corrosion behavior of Mg-SiO2 nanocomposites. Acta Materialia,2022,230,117840.
https://doi.org/10.1016/j.actamat.2022.117840
74. Sun Shiduo, Li Dongwei, Yang Chenpeng, et.al. Direct Atomic-Scale Observation of Ultrasmall Ag Nanowires that Exhibit fcc, bcc, and hcp Structures under Bendi. Physical Review Letters,2022,128(1),015701.
https://doi.org/10.1103/PhysRevLett.128.015701
75. Huang Jing, Li Wanpeng,He Junyang, et.al. Dual heterogeneous structure facilitating an excellent strength-ductility combination in an additively manufactured multi-principal-element alloy.Materials Research Letters,2022,10(9),575-584.
https://doi.org/10.1080/21663831.2022.2067790
76. Zhang Hao,Wei Bingqiang,Ou Xiaoqin, et.al. Atomic-scale understanding of the reversible HCP FCC phase transition mechanisms at {10(1)over-bar1} twin tip in pure titanium. International Journal of Plasticity,2022,156,103357.
https://doi.org/10.1016/j.ijplas.2022.103357
77. Zhang Hao, Wei Bingqiang, Ou Xiaoqin, et.al. Atomic-level study of {1011} deformation twinning in pure Ti and Ti-5at.% Al alloy.International Journal of Plasticity,2022,153,103273.
https://doi.org/10.1016/j.ijplas.2022.103273
78. Wang Shuqi, Wen Lei,Wang Yaming, et.al. One-step fabrication of double-layer nanocomposite coating by plasma electrolytic oxidation with particle addition.Applied Surface Science,2022,592,153043.
https://doi.org/10.1016/j.apsusc.2022.153043
79. Wang Yingying, Zhang Jingnan,Balogun (Jie Tang), M. -S.,et.al. Oxygen vacancy-based metal oxides photoanodes in photoelectrochemical water splitting.Materials Today Sustainability, 2022,18,100118.
https://doi.org/10.1016/j.mtsust.2022.100118
80. Yuan Bo,Harvey, Christopher M.,Shen, Ke, et.al. Swelling-induced telephone cord blisters in hydrogel films.Composite Structures,2022,280,114909.
https://doi.org/10.1016/j.compstruct.2021.114909
81. Huang Weiying, Chen Jianhua, Zhang Ruizhi,et.al. Effect of deformation modes on continuous dynamic recrystallization of extruded AZ31 Mg alloy. Journal of Alloys and Compounds, 2022,897,163086.
https://doi.org/10.1016/j.jallcom.2021.163086
82. Du Yachu, Yuan Dafei, Awais, Mohammad A., et.al. New semi-ladder polymers for ambipolar organic light-emitting transistors.Chemical Communications,2022,58(81),11347-11353.
https://doi.org/10.1039/d2cc04087e
83. Wang Yuan, Xu Yunbo, Wang Xu, et.al. Improving the stretch flangeability of ultra-high strength TRIP-assisted steels by introducing banded structure. Materials Science and Engineering A, 2022,852,143722.
https://doi.org/10.1016/j.msea.2022.143722
84. Huang Weiying,Huang Huang, Li Wei,et.al. Influence of heat treatment and pre-straining on dynamic precipitation and creep behavior of AZ91-0.5Y magnesium alloys.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,2022,841,143049.
https://doi.org/10.1016/j.msea.2022.143049
85. Nan Bing, Yu Jing,Ma Chao,et.al. Copper oxide clusters modified by bismuth single atoms to catalyze CO oxidation.Applied Catalysis A-General,2022,636,118578.
https://doi.org/10.1016/j.apcata.2022.118578
86. Peng Zhiliang, Zhang Jian, Zhang Mingjun, et.al. Laser in-situ preparation and mechanical properties of VC reinforced Fe-based wear-resistant composite cladding.Ceramics International,2022,48(19),28240-28249.
https://doi.org/10.1016/j.ceramint.2022.06.129
87. Song Yuxuan, Yu Ting, Chen Hongyu, et.al. Understanding the relation between creep-fatigue fracture mechanisms and intergranular dislocation accommodation of a high chromium steel using nanoindentation characterization.International Journal Of Fatigue,2022,159,106796.
https://doi.org/10.1016/j.ijfatigue.2022.106796
88. Zhang Xu, Wang Dan, Wang Zuyong, et.al. Clinical perspectives for repairing rotator cuff injuries with multi-tissue regenerative approaches. Journal of Orthopaedic Translation, 2022,36,91-108.
https://doi.org/10.1016/j.jot.2022.06.004
89. Xu Qi, Zhang Jian,Mao Cong, et.al. Cu-induced enhancement of interfacial bonding for brazed diamond grits with Ni-Cr filler alloys. International Journal of Refractory Metals and Hard Materials,2022,106,105874.
https://doi.org/10.1016/j.ijrmhm.2022.105874
90. Li Huaxin, Cheng Chuan,Shi Lei,et.al. An ultra-strength SiC ceramic joint with an in-situ formed high-entropy carbide interlayer via diffusion bonding by spark plasma sintering. Materials Characterization,2022,194,112350.
https://doi.org/10.1016/j.matchar.2022.112350
91. Tang Ya, Xiao Daihong, Huang Lanping,et.al. Dynamic microstructural evolution of Al-Cu-Li alloys during hot deformation.Materials Characterization,2022,191,112135.
https://doi.org/10.1016/j.matchar.2022.112135
92. Song Yuxuan, Pan Zhouxin, Li Yuebing,et.al. Nanoindentation characterization on the temperature-dependent fracture mechanism of Chinese 316H austenitic stainless steel under creep-fatigue interaction. Materials Characterization,2022,186,111806.
https://doi.org/10.1016/j.matchar.2022.111806
93. Zeng Fanwang, Zheng Haizhong,Li Guifa, et.al. Study on the structural, mechanical, and dynamical stabilities and properties of Nb(2)AN (A = Si, Ge, and Sn) MAX phases by first principle. Journal of the American ceramic society,2022,105(8),5285-5298.
https://doi.org/10.1111/jace.18442
94. Zhang Hao, Ou Xiaoqin, Zhang Xiaoyong, et.al. Effects of Al on crack propagation in titanium alloys and the governing toughening mechanism.MECHANICS OF MATERIALS,2021,163,104107.
https://doi.org/10.1016/j.mechmat.2021.104107
95. Zhong Lijie, Zhang Xingming, Wang Liang, et.al. Synergistic engineering of shell thickness and core ordering to boost the oxygen reduction performance.Physical Chemistry Chemical Physics, 2022,24(22),13784-13792.
https://doi.org/10.1039/d2cp00861k
96. Liu Rui-Zhe, Zhang Lei, Guo Kun-Kun, et.al. Precise Pentamers with Diverse Monomer Sequences and Their Thermal Properties. CHINESE JOURNAL OF POLYMER SCIENCE, 2022,40(5),447-455.
https://doi.org/10.1007/s10118-022-2689-1
97. Li Xin, Zhang Jian, Xu Qi, et.al. Effect of CeSi2 addition on microstructures of brazed layers and interfacial characteristics of brazed diamonds with Ni-Cr filler alloy. DIAMOND AND RELATED MATERIALS,2022,130,109486.
https://doi.org/10.1016/j.diamond.2022.109486
98. 刘超强,谢宗瑜,张晓泳等，双态与单相Ti-5Al-5Mo-1Fe-1Cr合金的力学性能及变形行为（英文）, Transactions of Nonferrous Metals Society of China,2022.
https://kns.cnki.net/kcms/detail/43.1239.TG.20220413.2025.010.html
99. 李微,黄煌,黄伟颖等，预压缩对热挤压AZ91-2Y镁合金动态析出相形成及蠕变各向异性的影响（英文）,Transactions of Nonferrous Metals Society of China，2022.
https://doi.org/10.1016/S1003-6326(22)66038-2
100. Zhang Jian, He Liu, Yao Yuan,et.al. Hydrogen storage properties of magnesium hydride catalyzed by Ni-based solid solutions. Transactions of Nonferrous Metals Society of China, 2022,32(2),604-617.
https://doi.org/10.1016/S1003-6326(22)65819-9
101. Gan Xianglai, Hu Wangyu, Fei Linfeng, et.al. Atomic mechanism for the transformation of amorphous carbon film to graphene on Cu substrate.Computational Materials Science, 2022,203,111145.
https://doi.org/10.1016/j.commatsci.2021.111145
102. Tang Ya, Xiao Daihong,Huang Lanping, et.al. Effect of Minor Sc Addition on the Microstructure Evolution of Al-Cu-Li-Mg Alloy During Homogenization with Different Cooling Modes. Metals and Materials International,2022,28(10),2422-2433.
https://doi.org/10.1007/s12540-021-01146-9
103. An Zhiyuan, Ai Qiang,Chen Haitao, et.al. Engineering WS2 exciton polarization by an anisotropic organic substrate. Journal of Applied Physics ,2022,132(11),114302.
https://doi.org/10.1063/5.0094819
104. Khan, M. Saleem, Liang Tao, Liu Yuzhi, et.al. Microbiologically Influenced Corrosion Mechanism of Ferrous Alloys in Marine Environment. Metals,2022,12(9),1458.
https://doi.org/10.3390/met12091458
105. Wu Yue, Luo Siwei, Wu Jiawei, et.al. Development and Characterization of CrCoNi Medium Entropy Alloy Particles Reinforced Aluminum Matrix Composite.CRYSTALS,2022,12(10),1452.
https://doi.org/10.3390/cryst12101452
106. Li Guoai, Hao Shijia, Gao Wenli, et.al. The Effect of Applied Load and Rotation Speed on Wear Characteristics of Al-Cu-Li Alloy. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022,31(7),5875-5885.
https://doi.org/10.1007/s11665-022-06613-x
107. Zhang Zhihao, Zhang Jian,Zhang Mingjun, et.al. First-principles calculations on brazed diamond with FeCoCrNi high entropy alloys doped with strong carbide-forming elements. SOLID STATE COMMUNICATIONS,2022,357,114980.
https://doi.org/10.1016/j.ssc.2022.114980
108. Huang Haitang, Li Guifa, Xiao Xuan,et.al. First-principles investigations of the fracture toughness of NbCr2 alloyed by X (V, Mo, Ti, Fe). SOLID STATE COMMUNICATIONS, 2022,344,114664.
https://doi.org/10.1016/j.ssc.2022.114664
109. Ma Lei, Deng Yufei,Ren Ying,et.al. Influence of orientation on crack propagation of aluminum by molecular dynamics.EUROPEAN PHYSICAL JOURNAL B,2022,95(2),25.
https://doi.org/10.1140/epjb/s10051-022-00285-1
110. Tang Hongbo, LI Qiuyue, Zhou Jian,et.al. First Principles Study on the Electronic Structure and Optical Properties of La Doped YB6 Crystals.MATERIALS SCIENCE-MEDZIAGOTYRA, 2022,28(1),9-13.
https://doi.org/10.5755/j02.ms.25006
111. Huang Haitang, Li Guifa, Xiao Xuan,et.al. Effect of Si Alloying on Stability and Fracture Toughness of C15 NbCr2 Laves Phase: First-Principles Study. Rare Metal Materials and Engineering,2022,51(4),1318-1324.
https://www.webofscience.com/wos/woscc/full-record/WOS:000799378800023
112. Li Lingfang, Yuan Zhipeng, Fan Changling. Preparation of SnO2@Ti3C2Tx and Its Application in Lithium Ion Battery as Anode Material.Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research，2022,36(8),602-608.
https://doi.org/10.11901/1005.3093.2021.443
113. 谢贵久,杨斌,张月鑫等. 工作温度对Pd-Ni合金薄膜电阻氢敏性能的影响.2022
https://kns.cnki.net/kcms/detail/50.1083.TG.20220606.1708.008.html
